lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-09-2009, 12:29 PM   #1
oldngray
Gone Wild
 
oldngray's Avatar
Club Car
 
Join Date: May 2009
Location: SW Florida
Posts: 164
Default Motor or Controller Fried

1991 HA Club car.
Have just checked the Voltage at the Motor, I get 36.4V with the key off and the cart will not move. I have the same voltage across the large terminals on the solenoid which does not click.
Would I have to assume that with voltage to the motor and it Still won't move that the motor is gone?
oldngray is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car




Similar Threads
Thread Forum
a DC motor controller ( electronic speed controller) Golf Carts and Parts
Motor controller and Motor match? Electric Club Car
solenoid fried? Electric EZGO
12v Radio with push/pull switch fried the wire! Electric Club Car
Fried Motor? Electric Club Car


All times are GMT -5. The time now is 03:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.