|
03-28-2008, 06:25 PM | #1 |
Not Yet Wild
Join Date: Mar 2008
Location: S. GA
Posts: 65
|
13hp clone
just put 13hp honda clone in 91 carryall. it works...is the key switch suposta shut it off.can the idle be adj. down. IT/S ALL NEW TO ME.first post. first cart.
|
03-28-2008, 07:37 PM | #2 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
Re: 13hp clone
First off welcome to the site, There is gonna be abunch of questions to follow I'm sure. Lets see some pics of the transformation.
I'm not sure, I have never owned a electric start honda clone, Just a corded one on a Barstool. Might wanna check out this thread here. http://www.buggiesgonewild.com/membe...cart-fart.html |
03-28-2008, 09:56 PM | #3 |
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
Re: 13hp clone
It can be wired either way.
And yes you can tone down the idle with the idle screw. See your motor's manual. |
03-28-2008, 10:22 PM | #4 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: 13hp clone
Check the ground on the key switch, if it isn't making a good connection then you will be able to start the engine but not stop it with the key switch. A lot of times the powder coat will cause this to happen.
|
03-28-2008, 10:23 PM | #5 |
Gone Wild
Join Date: Aug 2007
Location: Jerusalem AR
Posts: 214
|
Re: 13hp clone
What is the brand name on your clone?
I have a 16hp "Power Mate". Sitting beside my buddies Honda you can't tell the difference except for the color. I know I'm gonna catch it over this My motor does fine for what I need it for and I know you Honda guys are going to hang me but for the money I decided to gamble on it. The idle on my motor is sensitive but bearable and it adjusts on the rear of the carb....black knob under the airbox. Good Luck and welcome, Bryan |
03-28-2008, 10:54 PM | #6 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
Re: 13hp clone
Some clones even had the same color.....My old one did. All it needed was the honda sticker....
|
03-29-2008, 06:12 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 13hp clone
Where do you get these clones?
|
03-29-2008, 08:57 AM | #8 |
Gone Wild
Join Date: Aug 2007
Location: Jerusalem AR
Posts: 214
|
Re: 13hp clone
scottyb
I got my clone from Ebay...16hp elec start delivered to my door for 452.00 So far I'm happy with the motor,everything seems to be working fine. I wired the control panel where the factory ignition was on the cart so I would have a key start instead of the reg pedal start. Bryan |
03-29-2008, 10:29 AM | #9 |
Not Yet Wild
Join Date: Mar 2008
Location: S. GA
Posts: 65
|
Re: 13hp clone
i got my 13hp clone for 318.00 to the door from carroll stream ayear ago.its red so looks just like the real thing. finally got the time to put it in after having the crank turned to match the clutch for 50.00 bucks. runs great eyeballed the allianment drilled four holes and bam it works great except i got the belt alittle tight have to shut it off to put it in gear.
|
03-05-2010, 03:00 PM | #10 |
Gone Wild
Join Date: Mar 2010
Location: wolflake, indidana
Posts: 467
|
Re: 13hp clone
the clone motors look pretty much honda gx 350's . i have the same old problem. blown up fe290. don't want to spend the $ to get one from club car. how do those of you who have put clones in your carts like them. i'm condsidering ordering a 16hp with electric start from carrol stream. comments?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
13HP came in one piece | Big Block Talk! | |||
Having some fun with 13hp | Videos | |||
13hp Club Car Swap | Big Block Talk! | |||
My 13hp engine update | Big Block Talk! |