Club Car Caroche discontinued part

[tulsaguy]

Anyone have any idea where I can get a forward and reverse switch for a '74 Club Car Caroche? I'm told it is no longer available by the parts guys I have contacted. OR has anyone ever converted that switch to an updated version that was still cosmetically pleasing?
I appreciate the help.

[custom carts]

i know you can use a new year f and r switch i will look and post info tonite

[custom carts]

ok here you go hopes this will help you

Forward and Reverse Switch Assembly for 1983-1/2 to 2001 Club Car with 36 volt system with resistors, also pre 1983-1/2 with modifications, includes micro switch, does not include handle, can be retrofitted to be used on earlier Club Cars. NOTE: We now have wiring diagrams for installing this switch on pre 1983-1/2 carts, The link is above the pictures of the carts on the Club Car home page. You will need to drill new mounting holes in the mounting bracket. On 1975 to 1979 remove the two motor wires, (A1 and A2) that are connected at the bottom of the switch and jumpered to the rotor. Hook them back up to the rotor only. Now take (S) wire that was connected to the upper right bus bar on your old switch and move it to one of the two lower parallel bus bars. These two bars will need to be jumpered together. Now take the battery positive cable and hook it to the single bus bar on the right side. On 1981 to 1985 install the two wires that went to the rotor back on the rotor of the new switch. Move battery positive to the single right hand bus bar. Connect the S1 terminal from the motor to one of the bottom parallel bus bars on the bottom of the new switch. These two bus bars will need to be jumpered together. The fourth wire coming from the middle of the battery stack is not used and should be removed. This wire was for an 18 volt reverse so you would not go as fast in reverse

[custom carts]

also here is the wiring diagram 1974 hope this info will help you

[tulsaguy]

Thanks Custom Kid! I appreciate the help!

[tulsaguy]

Well, I replaced the old switch with the new version, it was burned out pretty bad, but the cart will still on occasion, take off by itself even with the key switch off? The only way to stop it is to put the cart in neutral. So am I dealing with a faulty foot peddal switch? But even at that, the cart should stop when the key switch is turned off right?

[tulsaguy]

Problem found was a solenoid sticking. IT'S ALIVE!!!!

[custom carts]

cool glad you got it