|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-15-2019, 07:28 PM | #1 |
Not Yet Wild
Join Date: Jul 2018
Posts: 12
|
What clutch tool for pro hauler 700
Hey guys! I ordered a clutch remover for my
Pro hailer 700. There is no single hole big enough for it to fit in. There are 2 small holes on the side of the center shaft, but I don’t m ow what to search. I added a pic for reference. I hope someone can help! IMG_4215.jpg Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-15-2019, 07:44 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: What clutch tool for pro hauler 700
The puller bolt you got was for the front clutch, you are trying to remove the rear clutch (AKA secondary clutch). I can see by the picture that the rear clutch is the same type as all other Yamaha gas carts prior to 2007 (G-1 through G-22). Search for that and the answers to get those off will remove yours too.
|
08-15-2019, 08:40 PM | #3 |
Not Yet Wild
Join Date: Jul 2018
Posts: 12
|
Re: What clutch tool for pro hauler 700
Thanks!!!
Sent from my iPhone using Tapatalk |
08-15-2019, 09:20 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: What clutch tool for pro hauler 700
Oh yeah, those 2 holes are for the puller. Yours are very plugged with junk. Clean them out. The threads are metric M6. And when you are taking yours apart, pay close attention to what holes are occupied by the spring tangs. The world may never know what that vehicles original setting was.
|
08-16-2019, 06:31 AM | #5 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: What clutch tool for pro hauler 700
This
|
08-20-2019, 05:49 PM | #6 |
Not Yet Wild
Join Date: Jul 2018
Posts: 12
|
Re: What clutch tool for pro hauler 700
IMG_4344.jpg
I was able to pop the outer sheave off with the clutch pulled. How do I get the rest off! I am so sorry for the dumb questions! I have searched and can’t find out how on my clutch Sent from my iPhone using Tapatalk |
08-20-2019, 06:30 PM | #7 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: What clutch tool for pro hauler 700
The only thing holding the rest on is a woodruff key in the input shaft. Some times they are little tight. Just be careful not to maul the input shaft when removing it.
|
08-20-2019, 08:18 PM | #8 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: What clutch tool for pro hauler 700
Jakes has a video of the whole procedure on youtube for the yamaha. Just type in yamaha secondary clutch removal and his video is there.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1982 clutch ramp button replacement and 'clutch tool" | Gas EZGO | |||
clutch removal tool | Gas EZGO | |||
Clutch tool | Gas Yamaha | |||
clutch tool | Gas EZGO | |||
Clutch tool came in | Gas Yamaha |