01-24-2021, 06:06 AM | #1 |
Not Yet Wild
Join Date: Feb 2020
Location: Pretoria, South Africa
Posts: 36
|
My Bushman Cart
Hey guys,
Wanted to share my latest purchase. Picked it up cheap from my neighbor who recently moved. The cart certainly does need some work, so was hoping to post photos of repairs etc here. Can’t find much info about them, but seems like a local company here in South Africa brought them in. Work needed; -2 battery terminals are melted and will need repair if I do not end up just replacing batteries. -Charger input has melted, will replace unit. -The cart shudders at low speed but goes away after driving, problem returns after standing over night. -needs new brake shoes -needs new upholstery -needs new windscreen -needs new tyres Will post updates here as they come along Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-25-2021, 03:56 AM | #2 |
Not Yet Wild
Join Date: Feb 2020
Location: Pretoria, South Africa
Posts: 36
|
Re: My Bushman Cart
Cleaned up the dash and made things a bit more neat.
Before & After pics atatched. |
02-05-2021, 04:36 AM | #3 |
Not Yet Wild
Join Date: Feb 2020
Location: Pretoria, South Africa
Posts: 36
|
Re: My Bushman Cart
The cart has a shudder when pulling away, only happens once in the beginning of the day and then fine for the rest until the next time driven after standing for the night.
Removed motor to inspect, will require new brushes. Sent from my iPhone using Tapatalk |
02-05-2021, 04:29 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,045
|
Re: My Bushman Cart
It's a nice looking cart....keep the updates coming.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-11-2021, 01:40 PM | #5 |
Not Yet Wild
Join Date: Feb 2020
Location: Pretoria, South Africa
Posts: 36
|
Re: My Bushman Cart
Hi Everyone,
I had the motor out and brushes replaced. Although now when in forward the cart goes reverse, and when switched to reverse the cart goes forward. All wiring is exactly where it was before removing. It was labeled, and S1 & S2 are in the correct place. Am I missing something, how can it now be the opposite? Low on power in forward, but obviously 100% power in reverse. Thank you in advance Sent from my iPhone using Tapatalk |