FJ Programming Tool - ACS1-20221112-1(中英文).fdev

[evoster]

Originally Posted by justinarchangelo

That was only the FDEV

look again

[HoleIn12]

Originally Posted by evoster

look again

Evoster... as always appreciate you trying to assist us denago folks...so with these files, I get something different than received before:

with these two files i received upon connecting:
"The data file is not match firmware type! [FW:0 | Fdev: 1]

ACS1-20210427-1-E-C.fdev
License-TAO_Denago-20240119114858.flic

AND

with these two files i received upon connecting:
"The data file is not match firmware type! [ID:0 | Fdev: 3001]

ACG1-20231229-1TAO_Denago.fdev
License-涛涛车业-20220728093738-TAO.flic

any thoughts of the slight differences?

[evoster]

Originally Posted by HoleIn12

Evoster... as always appreciate you trying to assist us denago folks...so with these files, I get something different than received before:

with these two files i received upon connecting:
"The data file is not match firmware type! [FW:0 | Fdev: 1]

ACS1-20210427-1-E-C.fdev
License-TAO_Denago-20240119114858.flic

AND

with these two files i received upon connecting:
"The data file is not match firmware type! [ID:0 | Fdev: 3001]

ACG1-20231229-1TAO_Denago.fdev
License-涛涛车业-20220728093738-TAO.flic

any thoughts of the slight differences?

Is this a typo?
"The data file is not match firmware type! [ID:0 | Fdev: 3001]

The application doesn't use "ID" in that error message, it uses FW in the first parameter

I'm thinking the error message you see in second instance is actually:
"The product ID is not match firmware type!"

Can you confirm?

[HoleIn12]

Originally Posted by evoster

Is this a typo?
"The data file is not match firmware type! [ID:0 | Fdev: 3001]

The application doesn't use "ID" in that error message, it uses FW in the first parameter

I'm thinking the error message you see in second instance is actually:
"The product ID is not match firmware type!"

Can you confirm?

my apologies... it does say:

"the Product ID is not match firmware type! [ID:0 | Fdev: 3001]"

i have also tried mix and matching each flic file to each .fdev with same results

[evoster]

Originally Posted by HoleIn12

my apologies... it does say:

"the Product ID is not match firmware type! [ID:0 | Fdev: 3001]"

i have also tried mix and matching each flic file to each .fdev with same results

In both cases, the error message is basically saying that the value returned from the firmware doesn't match the FDEV

The various FLICs that you tried, shouldn't make a difference to the issue though

The reason that I wanted to clarify the error message is that product ID is an odd duck on the FJ controllers and it seems that the G1 series controller FDEV vary it more

Having mumbled all that, the real news is your controller is returning 0 data in response to those queries. Get that figured out and we can get you an FDEV that matches your controller.

Do you have a good cable now?

Did you send me the output from FJit?