2022 Evolution Controller Software

[BobInDaytona]

I have the software and cable. Believe it or not - I have yet to encounter a 2022 evolution in our area.
I live in Daytona Beach as my name suggests - anyone have a 2022 in the area we can play with?

[KRAZYMATT]

Originally Posted by BobInDaytona

I have the software and cable. Believe it or not - I have yet to encounter a 2022 evolution in our area.
I live in Daytona Beach as my name suggests - anyone have a 2022 in the area we can play with?

Seems like there is a ton in the villages!

[ATrain]

Originally Posted by KRAZYMATT

The one i found needs some kind of activation. It hangs up and says contact representative. When you close the nag screen theres a red dot in the bottom left about some kind of activation.

I MAKE THE CABLES WHICH HAVE BEEN FULLY TESTED. They are different from the Curtis equipment.

If it's the software that has a picture of an Evolution cart on the initial loading screen, then that license file is a *.flic file that needs to be located in the same directory as the Evolution.exe file. There's also a *.fdev (or some other extension) file that contains all the parameters and configurations for the different carts.

I was bored trying to reverse engineer the license so I can make a custom license that has everything unlocked, but it's a pain and I just haven't had time. That screenshot is their main decryption algo, which isn't too complex.

[ATrain]

Also, if you have the software and are having activation/opening issues, there's a little ghetto "activation" BS they have which checks your computer for the mere existence of a registry key and if you don't have it, you must not be "activated".

In Notepad, copy & paste the following, save the file as "EvolutionActivation.reg", double click the file to add it to your registry, click "Yes" on the prompt. Now the software should at least open.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\EVCTRL]
@=""

[HKEY_LOCAL_MACHINE\SOFTWARE\EVCTRL\Programmer]
@=""
"Key"=dword:00000001

[kenpappas]

Originally Posted by KRAZYMATT

Finally a working link and it’s in english! Do you happen to have a manual for the controller or list of parameters?

Matt,

Why the 3 different cables?

[KRAZYMATT]

Originally Posted by kenpappas

Matt,

Why the 3 different cables?

? this controller only takes 1 cable, not sure what you're referring to.

DOES ANYONE HAVE ANY DOCUMENTATION ON THE CONTROLLER OR SOFTWARE?!?!?!

[italian_spider]

Hello KRAZYMATT
I picked up your cable on ebay, it should arrive this saturday. I found the software and looks like the install went off without a hitch. I plan on hooking up sunday or monday to test it out.. just one question. I am thinking the connector for the cable to attach to is the white one under the drivers seat with wire numbers 16,19,18,and 13. Is this correct?

[MTOakey]

Txt me for a link for the Software package ...

Seven8Six 2Four6 Five19Nine

This package contains "last years 2021" Data file, you will need to download this years 2022 Data file ...

And there is a link to a PDF with a link to the software to Update the Touchscreen ...

I'm still trying to locate a BMS Flash Update ...

.

[rayriggs]

Does anyone know if a Curtis 1313-4431 OEM hand held programmer will work on the evolution contriollers?

[chadshlong]

Got it working thanks