Evolution Programming

[Mdamon34]

Originally Posted by Chyzm345

I have the newer 2022 Evolution cart and with the cable and software I am able to adjust the speed config but can’t figure out where the acceleration setting is. Had anyone had any luck with increasing the acceleration and what is the parameter name?

Hi, do you know where you got the software and cable. I have a 2023 evolution forester 4. Thank you

[Thblur7]

Originally Posted by Chyzm345

I have the newer 2022 Evolution cart and with the cable and software I am able to adjust the speed config but can’t figure out where the acceleration setting is. Had anyone had any luck with increasing the acceleration and what is the parameter name?

You have the new software for 2022 cart?

[smally1989]

Originally Posted by KRAZYMATT

I have them. PM sent.

I'm in the same boat! 2022 Forester 4. I love this cart but I don't think they spend a lot of time on the programming set up. One neighbor does 32 mph with super slow acceleration. Mine accelerates fine but tops out at 21 and my low speed is set at 8 lol Any info you have would be amazing I need the cable/ software any mapping you may know of. Please PM me!! Thanks a ton!

[smally1989]

Originally Posted by KRAZYMATT

Calibration -> traction motor -> motor acceleration coeffiecent %. It’s 0-200 range. Set it to 175-200.

2022 Forester four

would you mind sending me the info on the cable, where you got the software etc? Any mapping you've done i have a couple of carts just got this one its built pretty solid for the price but all four my neighbors have the same cart and we all are set up differently out of the box!

Thanks a ton !

[bgw1982]

I have a chinese knock off of the Curtis 1313 programmer I used to program my evolution. I'm in Carlsbad, CA 92008. DM me if you want to try some tweaks.

[Kenithlaw]

Originally Posted by bgw1982

I have a chinese knock off of the Curtis 1313 programmer I used to program my evolution. I'm in Carlsbad, CA 92008. DM me if you want to try some tweaks.

I'm in SD and would pay for the help here.

Kenny
6one9 8O8 2815

[TommyCart]

Originally Posted by KRAZYMATT

I have them. PM sent.

I have a D5 on order and need software to program when it gets here. Appreciate any help in obtaining and installing.

[evoster]

Originally Posted by TommyCart

I have a D5 on order and need software to program when it gets here. Appreciate any help in obtaining and installing.

the D5 uses the EV48-400A controller so use the older Evolution programming software that's found in the wild (including some posts in this group)

Order your cable from Matt

[Blklghtng]

Originally Posted by KRAZYMATT

I have them. PM sent.

Matt- I have a 23 EVO carrier 6 that I would like to change a few settings on, High speed up (22 currently)
Regen down a bit

Any settings you suggest or the parameter tree to get to them?. Thanks

[Blklghtng]

Anyone been playing around with programming and found parameters they like better?