|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
06-24-2020, 10:56 PM | #1 |
Not Yet Wild
Join Date: Jan 2009
Location: So Il
Posts: 7
|
Gathering parts/will this combo work?
Need help identifying this rearend. Also would this clutch setup work with a 16hp vanguard. Any thoughts are appreciated.
Last edited by 79star; 06-24-2020 at 11:13 PM.. Reason: Insert photos |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-25-2020, 08:55 AM | #2 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Gathering parts/will this combo work?
Looks like a Yamaha G2/G9 rear end to me. Clutch should work fine.
|
06-25-2020, 11:47 AM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Gathering parts/will this combo work?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
06-25-2020, 12:27 PM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Gathering parts/will this combo work?
Should work. Make sure you try and get that rust off the outer clutch sheave. That surface likes to be pretty clean and polished. Don't use a grinder, just try and lightly sand with fine paper until the rust is gone, then go finer and finer until it's smooth and shiny. You could "polish" it, but probably not necessary.
Use the stock spring for clutch. Might be worth buying a new "stock" clutch spring. No need for a HD spring. |
06-25-2020, 06:54 PM | #5 |
Not Yet Wild
Join Date: Jan 2009
Location: So Il
Posts: 7
|
Re: Gathering parts/will this combo work?
Thank you all
|
06-25-2020, 06:59 PM | #6 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: Gathering parts/will this combo work?
Clutch experts doesn't that primary look to be for a tapered shaft ?
|
06-25-2020, 07:25 PM | #7 |
Not Yet Wild
Join Date: Jan 2009
Location: So Il
Posts: 7
|
Re: Gathering parts/will this combo work?
Which belt width should I plan on using and should this clutch fit directly on the Briggs?
|
06-25-2020, 07:26 PM | #8 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Gathering parts/will this combo work?
|
06-25-2020, 07:32 PM | #9 |
Not Yet Wild
Join Date: Jan 2009
Location: So Il
Posts: 7
|
Re: Gathering parts/will this combo work?
Will get inside pics tonight. Not sure what it came off of. Bought both for $40 at my local salvage yard.
Last edited by 79star; 06-25-2020 at 08:03 PM.. Reason: add comment |
06-25-2020, 10:13 PM | #10 |
Not Yet Wild
Join Date: Jan 2009
Location: So Il
Posts: 7
|
Re: Gathering parts/will this combo work?
Shoot. That does look tapered. Guess I'll have to find a different drive clutch
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Will parts on a electric 2014 drive work on a electric 2009 drive? | Electric Yamaha | |||
04 ezgo work horse parts | Golf Carts and Parts | |||
82 parts work on an 80 marathon | Gas EZGO | |||
Database of "Non-Golf Cart" Parts that will work in a pinch | Gas EZGO | |||
Craigslist combo, will it work | Gas Yamaha |