New member help

Juskepan · 06-03-2020, 04:34 PM

New member here. Trying to get necessary post for PM activation. Any advice on how to accomplish?
Also I responded on a thread and see where there was a reply but cannot find it?
TIA
JP

Swan · 06-03-2020, 06:41 PM

go to the introduction thread an d say hi to bunch new peeps . the test thread will not give you posts count

jakesnake27 · 06-10-2020, 10:04 AM

Quote test

Quote:

Cut the two black 10 gauge wires away from the OBC, butt connect them together with a yellow butt connector, unplug the OBC harness, and on the cart side connector, cut and splice together the blue and white wires. You are fully bypassed and can charge with a smart charger. If you want to remove the OBC, then remove the #6 cable from B- and pull it thru the OBC (you will have to take a pair of needle nose pliers and bend the lug like a "U") and then reconnect the cable to B-. The gray sense wire can be disconnected at the fuse, cut and removed entirely, or rolled up and zip-tied to the back of the charge receptacle.

06-03-2020, 04:34 PM	#1
Juskepan Not Yet Wild Join Date: Jun 2020 Posts: 14	New member help New member here. Trying to get necessary post for PM activation. Any advice on how to accomplish? Also I responded on a thread and see where there was a reply but cannot find it? TIA JP
Juskepan Not Yet Wild Join Date: Jun 2020 Posts: 14

06-03-2020, 06:41 PM	#2
Swan Cave Dweller Join Date: Apr 2013 Location: Always On The Move Posts: 22,232	Re: New member help go to the introduction thread an d say hi to bunch new peeps . the test thread will not give you posts count

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum