E 27 deformable 100 watt LED light

raydhd · 02-05-2020, 03:03 PM

My 4 bladed "100 watt" deformable light arrived from china yesterday. I have tried all types of different bulb types down in my lower work area. This thing is WAY brighter than anything else I tried.

cart around · 02-08-2020, 07:37 AM

5 minutes ago, not only did I not know that these existed, I didn't know that I needed one.
Then I started thinking about a corner of the basement.

Mine will be here tomorrow. Three bladed, 100 watt 10,000 lumens $42 with tax. Thanks Ray.

raydhd · 02-08-2020, 08:21 AM

5 Minutes before I seen the ad on facebook I didn't know they existed either. Then looked on Ebay and ordered one to test. Took over 1 month to show up from china. But it works so well I ordered 3 more from china. VERY SLOW delivery but only $9.58 delivered.

cart around · 02-08-2020, 09:41 AM

I will keep my eye out for cheaper ones.

I'm sure anything that hasn't already been shipped from China is going to take a long time. My airline, and all of the other Majors have quit flying to China until the Corona virus is under control. I'm sure the cargo flyers are doing the same thing. We are now reduced to waiting for slow boats.

While I was poking around amazon for that light, I also just bought myself a cut50 plasma cutter. It's in stock so will be here Monday.

raydhd · 02-08-2020, 09:51 AM

I have a Cut 50 also. Thing works REAL good.

cart around · 02-08-2020, 12:37 PM

I'm glad to hear you like it. I have watched a lot of review videos where they bought them on purpose to prove they were junk, and then find out they work pretty good.

It's another thing I didn't know that I needed until I started building an upside down log splitter that mounts on a skid steer quick attach plate. I wasn't going to buy it for just one project, but then I thought of two more where I could use it, so now it's on the way.

cart around · 02-09-2020, 06:50 PM

Ordered Saturday morning. Delivered Sunday at 5. Just installed it. This light is awesome. Definitely getting a few more.

raydhd · 02-09-2020, 08:19 PM

It is really hard to believe how bright they are against anything else I have bought.

raydhd · 02-09-2020, 08:20 PM

Quote:

Originally Posted by cart around

I'm glad to hear you like it. I have watched a lot of review videos where they bought them on purpose to prove they were junk, and then find out they work pretty good.

It's another thing I didn't know that I needed until I started building an upside down log splitter that mounts on a skid steer quick attach plate. I wasn't going to buy it for just one project, but then I thought of two more where I could use it, so now it's on the way.

Without the cut50 the Suzi project would have been much more difficult. Mr Chevy supplied a piece of 1/2' steel as a test which is WAY thicker than it is rated for.BUT by going Very slowly we were able to cut thru it.

Swan · 02-10-2020, 07:57 AM

what no links or pics , you guys are slipping .

02-05-2020, 03:03 PM	#1
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	E 27 deformable 100 watt LED light My 4 bladed "100 watt" deformable light arrived from china yesterday. I have tried all types of different bulb types down in my lower work area. This thing is WAY brighter than anything else I tried.

02-08-2020, 07:37 AM	#2
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: E 27 deformable 100 watt LED light 5 minutes ago, not only did I not know that these existed, I didn't know that I needed one. Then I started thinking about a corner of the basement. Mine will be here tomorrow. Three bladed, 100 watt 10,000 lumens $42 with tax. Thanks Ray.

02-08-2020, 08:21 AM	#3
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: E 27 deformable 100 watt LED light 5 Minutes before I seen the ad on facebook I didn't know they existed either. Then looked on Ebay and ordered one to test. Took over 1 month to show up from china. But it works so well I ordered 3 more from china. VERY SLOW delivery but only $9.58 delivered.

02-08-2020, 09:41 AM	#4
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: E 27 deformable 100 watt LED light I will keep my eye out for cheaper ones. I'm sure anything that hasn't already been shipped from China is going to take a long time. My airline, and all of the other Majors have quit flying to China until the Corona virus is under control. I'm sure the cargo flyers are doing the same thing. We are now reduced to waiting for slow boats. While I was poking around amazon for that light, I also just bought myself a cut50 plasma cutter. It's in stock so will be here Monday.

02-08-2020, 09:51 AM	#5
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: E 27 deformable 100 watt LED light I have a Cut 50 also. Thing works REAL good.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-08-2020, 12:37 PM	#6
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: E 27 deformable 100 watt LED light I'm glad to hear you like it. I have watched a lot of review videos where they bought them on purpose to prove they were junk, and then find out they work pretty good. It's another thing I didn't know that I needed until I started building an upside down log splitter that mounts on a skid steer quick attach plate. I wasn't going to buy it for just one project, but then I thought of two more where I could use it, so now it's on the way.

02-09-2020, 06:50 PM	#7
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: E 27 deformable 100 watt LED light Ordered Saturday morning. Delivered Sunday at 5. Just installed it. This light is awesome. Definitely getting a few more.

02-09-2020, 08:19 PM	#8
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: E 27 deformable 100 watt LED light It is really hard to believe how bright they are against anything else I have bought.

02-10-2020, 07:57 AM	#10
Swan Cave Dweller Join Date: Apr 2013 Location: Always On The Move Posts: 22,217	Re: E 27 deformable 100 watt LED light what no links or pics , you guys are slipping .

Similar Threads
Thread	Forum
650 watt or 1050 watt multi volt charger	Electric EZGO
electrical wiring help for 90 watt LED Light Bar	Electric Club Car
Headlights 37 watt to 55 watt any problems	Electric EZGO
What Watt is my motor?	Electric EZGO
potentiometer risistors watt value?	Electric Club Car