10-18-2014, 11:11 AM | #1 |
Getting Wild
Join Date: Nov 2009
Location: Mayo, FL
Posts: 146
|
ITS Convertor wiring
I am installing a Flight Systems controller in a 48 volt converted ezgo. The cart is a series with ITS throttle. The controller came with a ITS converter but dont have a molex plug like the diagram shows. Anyone used this setup that can help me with wiring the converter up correctly?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-18-2014, 01:25 PM | #2 |
Getting Wild
Join Date: Nov 2009
Location: Mayo, FL
Posts: 146
|
Re: ITS Convertor wiring
i am replacing an Alltrax AXE contoller that went bad. The problem is the wire to the alltrax were red,black,white, and orange. the ITS converter has small pins there are 4 close togther and one by itself. the diagram shows the connection using a plug which is no longer on the cart.
|
10-18-2014, 01:40 PM | #3 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
Re: ITS Convertor wiring
Guess you will have to splice some wires, here is the alltrax diagram to cross reference.
http://www.alltraxinc.com/files/Doc1...O-Wire-Dia.pdf |
10-18-2014, 01:45 PM | #4 |
Getting Wild
Join Date: Nov 2009
Location: Mayo, FL
Posts: 146
|
Re: ITS Convertor wiring
here is a pic of the converter and cart wires
|
10-19-2014, 08:56 AM | #5 |
Getting Wild
Join Date: Nov 2009
Location: Mayo, FL
Posts: 146
|
Re: ITS Convertor wiring
ttt
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
dc convertor | Electric Club Car | |||
Fried CB- Do I need a power convertor? | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
voltage convertor | Electric Club Car |