Foward/Reverse gearing problem? Help please

dgpaulk · 11-15-2007, 10:35 AM

I recently was enlisted to do some work on the local ez-go electric golf cart. I believe that it was made in 1996 it is non dcs or pds. My problem is that I took apart the forward and reverse gear selector in order to oil it and when I have tried to put it back together the cam is not making contact with the micro switches like it should. The camshaft fits into its designated area and all the copper contacts make connections at the correct spots but there is a small gap between the top of the cam and the bottom of the micro switches. If I am to turn the cam the cam never comes in contact with the micro switches like it should. The forward/ reverse gear that I have looks like the one in the picture.

Any insight would be greatly appreciated.

phasetim · 11-15-2007, 06:36 PM

make sure the cam is on the right way. the bottom of the cam has a metal piece that goes with the stops on the board..

MuayThai41 · 11-18-2007, 08:08 PM

ditto

11-15-2007, 10:35 AM	#1
dgpaulk Not Yet Wild Join Date: Nov 2007 Posts: 1	Foward/Reverse gearing problem? Help please I recently was enlisted to do some work on the local ez-go electric golf cart. I believe that it was made in 1996 it is non dcs or pds. My problem is that I took apart the forward and reverse gear selector in order to oil it and when I have tried to put it back together the cam is not making contact with the micro switches like it should. The camshaft fits into its designated area and all the copper contacts make connections at the correct spots but there is a small gap between the top of the cam and the bottom of the micro switches. If I am to turn the cam the cam never comes in contact with the micro switches like it should. The forward/ reverse gear that I have looks like the one in the picture. Any insight would be greatly appreciated.
dgpaulk Not Yet Wild Join Date: Nov 2007 Posts: 1

11-15-2007, 06:36 PM	#2
phasetim Just me. . Join Date: Sep 2007 Location: Pensacola, FL Posts: 1,092	Re: Foward/Reverse gearing problem? Help please make sure the cam is on the right way. the bottom of the cam has a metal piece that goes with the stops on the board..

11-18-2007, 08:08 PM	#3
MuayThai41 Gone Wild Join Date: Dec 2006 Location: Irving Texas Posts: 249	Re: Foward/Reverse gearing problem? Help please ditto

Similar Threads
Thread	Forum
Faster in reverse?	Gas golf carts
gearing dilema	Big Block Talk!
do you lose reverse when.....	Big Block Talk!
Need a different setup for foward and reverse	Gas EZGO
reverse buzzer?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum