|
06-26-2019, 09:19 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2019
Posts: 6
|
Voltage reducer 2018 elite
I'm planning a bazooka tube install into my cart. I believe the two boot covered connections are the 12v and ground connections from the voltage reducer, but since the wires go into and out of the wiring harness, and I don't have a schematic, I'm not positive. Could someone verify my assumption for me? Also, does anyone have a schematic for this cart?
Thanks  Sent from my SM-N950U using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-26-2019, 11:14 PM
|
#2 |
|
Not Yet Wild
Join Date: May 2019
Posts: 6
|
Re: Voltage reducer 2018 elite
It is 12v across the terminals, so it must be. I guess there is no other 12v source other than the reducer. Sorry first cart and I'm just thinking through it.
Still, if anyone has a schematic, that would be helpful. Sent from my SM-N950U using Tapatalk |
|
|
|
|
06-27-2019, 01:40 AM
|
#3 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Voltage reducer 2018 elite
Those are indeed the 12v from the reducer. It is only rated for 20a if I recall, not gonna do much for an amp.
|
|
|
|
|
06-27-2019, 07:22 AM
|
#4 |
|
Not Yet Wild
Join Date: May 2019
Posts: 6
|
Re: Voltage reducer 2018 elite
The amp only has a 15 amp fuse and even then, I won't get near that.
Thanks Sent from my SM-N950U using Tapatalk |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2018 RXV Elite- 90 AMP Lithium system | Electric EZGO | |||
| October 2018 Yamaha Recall 2016-2018 models | Gas Yamaha | |||
| Question about wiring voltage reducer and voltage meter to key switch | Electric EZGO | |||
| Voltage Reducer | Electric Club Car | |||
| What is the difference between a Voltage Reducer & Voltage Converter | Electric Club Car | |||
Linear Mode
