|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-20-2019, 06:51 PM | #1 |
Gone Wild
Join Date: Sep 2018
Location: Md.
Posts: 1,059
|
Txt convertor disconnect
Question for the electrical gurus here.
Have a 2012 48 volt txt with factory sure power 48 to 12 volt reducer for accessories. Convertor is always drawling 1-1/12 amp from baterry even when not in use since it’s connected directly to battery. Currently disconnecting convertor via toggle switch so it’s not connected until toggle switch is on. Got to thinking today, could I tap 48 volt supply to convertor onto wire coming off of run/tow switch without damaging anything. In other words want to supply 48 volts to convertor only when run/tow switch is in run position. Looks like simple splice into red wire off switch but want to be sure it won’t damage controller, ect. Should I just keep current setup? Or will new idea work? Thanks 😊 |
|
|
Similar Threads | ||||
Thread | Forum | |||
BBB 48 to 12 volt convertor | Electric EZGO | |||
convertor wiring | Electric Club Car | |||
ITS Convertor wiring | Extreme DC! | |||
dc convertor | Electric Club Car | |||
voltage convertor | Electric Club Car |