|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-07-2010, 05:39 PM | #1 |
Getting Wild
Join Date: Jan 2010
Location: Upstate, S.C.
Posts: 126
|
new cable mounting
These are maybe questions that I should know the answer to or have the common sense to know.....so I guess that is why I am asking
I just made all new 4g wires for my 36v 92' tank. I am fixing to replace all my "nuts" as well to put them back on with. 1st Question is there any certain kind I should get (i.e. Stainless etc), or just regular old nuts ? 2nd Question, what is the correct way the lugs should be connected to each post on the F/R and motor ? Every thing I took off was different. Does it need to be lug/lock washer/nut ? Thats how most of them were that came off. Should the lug be between washers, or just a washer between the lug and nut ? Should they be lock washers against the lug ? 3rd question, what is the proper way on the motor ? There is a crap looking nut on the bottom of each motor post now that won't clean up with a wire brush, then the lug, then a star washer, then another nut. Do I just replace the two nuts on each post and new star washers ? I hope this makes some kind of sense to someone on here. I just want to make sure after making new cables and stuff that it goes back together like it should and everything new. Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-08-2010, 08:47 AM | #2 |
Getting Wild
Join Date: Jan 2010
Location: Upstate, S.C.
Posts: 126
|
Re: new cable mounting
bump: I guess I posted this too close to game time. Anyone ?
|
02-08-2010, 09:39 AM | #3 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: new cable mounting
|
02-08-2010, 10:56 AM | #4 |
Getting Wild
Join Date: Jan 2010
Location: Upstate, S.C.
Posts: 126
|
Re: new cable mounting
Awesome man, thanks for your trouble. I am off to the hardware store or where ever I end up finding them. Btw, NONE of my cables were hooked up that way. I have told you before, but you have a VERY nice cart. Thanks again and I am finally ready for new batteries after today !
|
02-08-2010, 04:06 PM | #5 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: new cable mounting
thats a very nice f-n-r setup you have there.
|
02-08-2010, 06:33 PM | #6 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: new cable mounting
Thanks for the compliments. I did not look like that when I first started. I make the cables myself and sell them on the side but not cheap.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Winch mounting | Design Center | |||
Mounting Lights on the TXT | Electric EZGO | |||
Speaker Mounting | Design Center | |||
mounting a cargo box | Design Center | |||
Muffler mounting kit for 89 CC | Golf Carts and Parts |