Polaris clutches???

[kellett5261]

Originally Posted by randym

It actually works very well on a 16hp vanguard swap. You need the D80 clutch weights and a 7041022 clutch spring. Easy to shift while running, engagement is good. I suggest running the polaris secondary clutch with the red spring.

I am thinking of running a Polaris RZR 800 clutch on my EZG big block. VC doesn't have there 780 in stock for at least 4 more weeks and I am not having a broken cart for Halloween. So i canceled my VC order

I found a few on amazon that I could get but not sure which one I want, they honestly look exactly the same as VC clutch.

this is the Clutch i am looking at - https://www.amazon.com/ApplianPar-Pr...s%2C322&sr=8-7

Does anyone have experience with CPP Tapered Clutch Adapter? i buy all my speed gears from them and they make good stuff.

https://www.cartpartsplus.com/perfor...clutch-adapter

[randym]

Originally Posted by kellett5261

I am thinking of running a Polaris RZR 800 clutch on my EZG big block. VC doesn't have there 780 in stock for at least 4 more weeks and I am not having a broken cart for Halloween. So i canceled my VC order

I found a few on amazon that I could get but not sure which one I want, they honestly look exactly the same as VC clutch.

this is the Clutch i am looking at - https://www.amazon.com/ApplianPar-Pr...s%2C322&sr=8-7

Does anyone have experience with CPP Tapered Clutch Adapter? i buy all my speed gears from them and they make good stuff.

https://www.cartpartsplus.com/perfor...clutch-adapter

I believe the clutch you linked is the newer style which would require the S94 weights. I used the older atv clutch which had slightly narrower weights and rollers. I use a steel taper adapter and it works just fine, but I haven't used an aluminum one.

[kellett5261]

Originally Posted by randym

I believe the clutch you linked is the newer style which would require the S94 weights. I used the older atv clutch which had slightly narrower weights and rollers. I use a steel taper adapter and it works just fine, but I haven't used an aluminum one.

See that's where i get slightly lost with the clutches and weights , not really my area of expertise's.

i did find this clutch with actual measurements, would be slightly a tight fit depth wise but i think it would be nice but

https://www.amazon.com/Flieeya-Alumi...MWFGF4SAVEFZXT

like you said about an older style clutch for a Polaris Xplorer which is for a smaller engine. not the 1000cc

https://www.amazon.com/Polaris-Xplor...NsaWNrPXRydWU=

also found this adapter on amazon for my 670 motor

https://www.amazon.com/DEEPSOUND-Tap...QBEZAX8G00BP4V

thoughts?

[kellett5261]

Originally Posted by randym

I believe the clutch you linked is the newer style which would require the S94 weights. I used the older atv clutch which had slightly narrower weights and rollers. I use a steel taper adapter and it works just fine, but I haven't used an aluminum one.

in this link on the 2nd photo look like the "s94" weights?

https://www.amazon.com/East-Lake-Axl...xpY2s9dHJ1ZQ==

[randym]

Originally Posted by kellett5261

in this link on the 2nd photo look like the "s94" weights?

https://www.amazon.com/East-Lake-Axl...xpY2s9dHJ1ZQ==

No, those look like stock weights which I think are about 56 grams. I'm not sure that you can buy a clutch with the correct parts in it for the smaller engines. I started with a good used clutch and ordered in the weights and spring.