|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
06-23-2015, 09:11 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2014
Posts: 67
|
Dana Spicer H-12 FNR rear end
I bought a Dana Spicer H-12 FNR rear end, for my big block golf cart.
It is a new unit, but it does not have a shift lever on the shaft that shifts the trans. Is there anyone out there that has one, made one, or know where I can obtain one. I had made a crude attempt to make one, and it worked at first, but soon got worn and sloppy. Any help would be appreciated. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-23-2015, 10:21 PM
|
#2 |
|
Gone Wild
 Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: Dana Spicer H-12 FNR rear end
I have a factory made UTV that I think has that rear in it. I found a site where they sell the parts and they may have what your looking for.
Parts! Where did you get the rear end? Does it have a locker? I think they made one with a locker which would be handy in a BB cart. Mine has the added gear box on the side that allows for 4 wheel drive which my UTV has. |
|
|
|
|
06-24-2015, 07:24 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2014
Posts: 67
|
Re: Dana Spicer H-12 FNR rear end
I bought the rear end, from a gentleman who was going to build a motorized picnic table. With the resurrection of his mid 60s Ford Fairlane, he didn't have time, so he put it up for sale.
I asked where he bought it, and he said it was from someone who bought a whole pallet full of the new rear ends. It's been a while since he bought it, so he didn't remember the specifics of the seller. I wish I did have the differential lock, and if there was one to purchase, without costing an arm and a leg, I would buy it. As far as the extra output shaft for 4 wheel drive, I'm not too interested. If you have a shifter arm, I would like to see it, and maybe if you could draw out the dimensions, and with pics, I'm sure I could duplicate it. |
|
|
|
|
06-25-2015, 08:28 AM
|
#4 |
|
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: Dana Spicer H-12 FNR rear end
Johnny, I'll try to get you a picture of the shift linkage arm and will get you measurements as well.
Mine is actually linkage hookup instead of cable. Myself, I'd go with a cable. I'll try to get those for you sometime today or tomorrow.  |
|
|
|
|
06-25-2015, 11:50 AM
|
#5 | |
|
Gone Wild
Join Date: Sep 2011
Location: ARIZONA
Posts: 476
|
Re: Dana Spicer H-12 FNR rear end
Quote:
Number 5 http://www.cubcadetpartsnmore.com/m5...tor-shift.html |
|
|
|
|
|
08-13-2015, 12:39 PM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2013
Posts: 69
|
Re: Dana Spicer H-12 FNR rear end
I need some dana h12 parts as well I also have the Polaris part # which is the same part.
|
|
|
|
|
08-13-2015, 12:40 PM
|
#7 |
|
Not Yet Wild
Join Date: Mar 2013
Posts: 69
|
Re: Dana Spicer H-12 FNR rear end
012da107x and Polaris 3235015
|
|
|
|
|
08-15-2015, 11:33 AM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2013
Posts: 69
|
Re: Dana Spicer H-12 FNR rear end
the long and the short of it is if you have a dana spicer h12 rear. tell people you have a trailwagon tw400 it helps them figure it out.
|
|
|
|
|
08-15-2015, 04:57 PM
|
#9 |
|
Not Yet Wild
Join Date: May 2014
Posts: 67
|
Re: Dana Spicer H-12 FNR rear end
That's good news. Going to my Polaris site, to see if I can find the rear end, and find the gears. Maybe I'll be changing them.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Dana Spicer Rear End?? | Golf Carts and Parts | |||
| Help with a Dana Spicer H-12 Electric rear transaxle | Electric EZGO | |||
| Dana Spicer H-12 | Design Center | |||
| Spicer dana rear axle from an easy go. rear frame included. | Golf Carts and Parts | |||
Linear Mode
