2022 Evolution Controller Software

[KnT]

Does anyone know a source for the PC software program for the new 2022 Evolution controller? I've tried every search string I can think of and have come up with nothing. Thanks in advance if you can point me in the right direction.

[KRAZYMATT]

The one i found needs some kind of activation. It hangs up and says contact representative. When you close the nag screen theres a red dot in the bottom left about some kind of activation.

I MAKE THE CABLES WHICH HAVE BEEN FULLY TESTED. They are different from the Curtis equipment.

[KnT]

Thanks Matt

[ATrain]

Originally Posted by KRAZYMATT

The one i found needs some kind of activation. It hangs up and says contact representative. When you close the nag screen theres a red dot in the bottom left about some kind of activation.

I MAKE THE CABLES WHICH HAVE BEEN FULLY TESTED. They are different from the Curtis equipment.

If it's the software that has a picture of an Evolution cart on the initial loading screen, then that license file is a *.flic file that needs to be located in the same directory as the Evolution.exe file. There's also a *.fdev (or some other extension) file that contains all the parameters and configurations for the different carts.

I was bored trying to reverse engineer the license so I can make a custom license that has everything unlocked, but it's a pain and I just haven't had time. That screenshot is their main decryption algo, which isn't too complex.

[Speters]

Can anyone help with the values for regenerative braking on a 2022 evolution cart? I increased the speed and acceleration. Now it seems the braking isn’t working like it was. Especially downhill. I let off the gas and it continues to gain speed. Thx

[mikewahoo191]

Originally Posted by KnT

Does anyone know a source for the PC software program for the new 2022 Evolution controller? I've tried every search string I can think of and have come up with nothing. Thanks in advance if you can point me in the right direction.

ditto - did find the cable on ebay but that's it

[KRAZYMATT]

Originally Posted by mikewahoo191

ditto - did find the cable on ebay but that's it

Yes, I make those cables.

[mikewahoo191]

Originally Posted by KRAZYMATT

Yes, I make those cables.

copy that - thanks for the intel. Working on how to get SW, etc. maybe as they push more of these out we will get more opportunities to address as DIY's.

Have a great day!

[StM92742]

Im in need of the cables aswell pm?

[fasteddie1979]

I downloaded from dealer on ***********. these link were posted there for english

sendspace.com/file/x9rvy7

sendspace.com/file/k6yphq