|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-26-2020, 01:52 PM | #1 |
Gone Wild
Join Date: Sep 2020
Location: Green Cove Springs, FL
Posts: 177
|
sr48500 with sw202 reversing contactor
I just want to be sure i have this correct.....which one of theses wiring schematics is correct or will they both work? They show the wire from the M- on the controller going to different places which causes others to be in different locations. I hope the pics are attached as this is my first attempt to attach anything.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-26-2020, 02:07 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: sr48500 with sw202 reversing contactor
If the Reversing Contactor has "Magnetic Blowouts" which is indicated by the "+" symbol near the big studs, then the attachment "pi b.pdf" (The one from Alltrax) is the correct way to wire it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Mock Install: Alltrax SR48500 Controller, 400a Solenoid, SW202 Reversing Contactor | Electric EZGO | |||
WTB: 48V SW202 Reversing Contactor | Golf Carts and Parts | |||
FS: 48V SW202 Reversing Contactor | Golf Carts and Parts | |||
SW202 reversing contactor and Alltrax AXE controller | Electric EZGO | |||
Reversing Contactor not working? EZGO TXT 48V w/SW202 Contactor. How to test it? | Electric EZGO |