Columbia/Harley engine

Larboc · 02-26-2013, 11:52 AM

Pulled from a 90's Columbia Par car. Needs crank bearings. It was running fine and then started getting intermittent spark. I tore it down and it looks like the magnetic ring was rubbing on the electronic pickup a little so that might have caused the intermittent spark. In any case there is slop in the crank bearings.

I'd recommend converting to points (cheap, easy, and more reliable) and putting a set of bearings and seals in it. Bore looks pretty good. Always started right up and ran good.

For now I'm hanging on to the starter/generator and clutch.

$200 obo for the base engine with carb and all the ignition parts/shrouds, etc.
located in 49955

02-26-2013, 11:52 AM	#1
Larboc Getting Wild Join Date: Mar 2012 Location: painesdale, mi Posts: 134	Columbia/Harley engine Pulled from a 90's Columbia Par car. Needs crank bearings. It was running fine and then started getting intermittent spark. I tore it down and it looks like the magnetic ring was rubbing on the electronic pickup a little so that might have caused the intermittent spark. In any case there is slop in the crank bearings. I'd recommend converting to points (cheap, easy, and more reliable) and putting a set of bearings and seals in it. Bore looks pretty good. Always started right up and ran good. For now I'm hanging on to the starter/generator and clutch. $200 obo for the base engine with carb and all the ignition parts/shrouds, etc. located in 49955

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Columbia Parcar/Harley	Gas Columbia ParCar
85 Columbia with a 75 Harley body?	Gas Columbia ParCar
Columbia Harley davidson restoration	Gas golf carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum