lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-10-2019, 06:18 PM   #1
1badtransam
Not Yet Wild
 
Join Date: Aug 2018
Posts: 3
Default G2 Steering Knuckle Spindle Removal for lift

I'm having trouble figuring our how the pin is removed from the original steering knuckle / spindle. There wasn't even a nut at the bottom of the large screw / pin.

I ordered a lift kit that comes with new spindles.

Do I have to press it out? Maybe cut the original and install new hardware?

I've attached some photos for reference.

Any suggestions?

Thanks!
Fred
Attached Images
File Type: jpg image1.jpg (15.6 KB, 0 views)
File Type: jpg image2.jpg (14.7 KB, 0 views)
1badtransam is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-10-2019, 06:32 PM   #2
ironmonkey17
Gone Wild
 
ironmonkey17's Avatar
Mixed Breed
 
Join Date: Apr 2014
Location: Ohio
Posts: 960
Default Re: G2 Steering Knuckle Spindle Removal for lift

I'm pretty sure you have roll pins that are holding it together and if I remember correctly there was a roll pin inside another roll pin, you need to punch the inside one out first.. good luck..
ironmonkey17 is offline   Reply With Quote
Old 12-10-2019, 06:49 PM   #3
1badtransam
Not Yet Wild
 
Join Date: Aug 2018
Posts: 3
Default Re: G2 Steering Knuckle Spindle Removal for lift

Thanks for the info.

I guess I'll clean the spindles up a little to even see where to punch out?
1badtransam is offline   Reply With Quote
Old 12-10-2019, 07:24 PM   #4
1badtransam
Not Yet Wild
 
Join Date: Aug 2018
Posts: 3
Default Re: G2 Steering Knuckle Spindle Removal for lift

Update: Once I removed the dirt... I did see where the pin(s) are. Drove them out from the inside spindle towards outer. Came right out.

Only to find out that they sent me the wrong lift as the spindles don't fit....


Thanks Again
1badtransam is offline   Reply With Quote
Old 12-10-2019, 07:34 PM   #5
ironmonkey17
Gone Wild
 
ironmonkey17's Avatar
Mixed Breed
 
Join Date: Apr 2014
Location: Ohio
Posts: 960
Default Re: G2 Steering Knuckle Spindle Removal for lift

well that sucks...
ironmonkey17 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Knuckle/spindle bushings Electric Club Car
RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer? Lifted Golf Carts
Ds steering knuckle Golf Carts and Parts
G22 Steering Knuckle Nut size Gas Yamaha
G2 lift - spindle removal Gas Yamaha


All times are GMT -5. The time now is 08:10 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.