lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-09-2010, 06:21 PM   #1
JDC
Gone Wild
 
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
Default RXV 6" lift

Has anyone put on one of the Jake's 6" lift on a gas 09 RXV ? I am doing the rear blocks and the drivers side wont fit in because the parking brake cable bracket is in the way. The other side is fine.what have you done for this.
JDC is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-14-2010, 08:56 PM   #2
NoTyme
Getting Wild
 
NoTyme's Avatar
E-Z-GO
 
Join Date: Jul 2010
Location: southeast Michigan
Posts: 87
Default Re: RXV 6" lift

I'll post for a bump on this issue: If E-Z-GO doesn't come up with a lift by years end I may go for the Jake's lift... I noticed that my driver's side brake cable has some rub marks from the inside of the tire.
NoTyme is offline   Reply With Quote
Old 08-15-2010, 05:31 PM   #3
JDC
Gone Wild
 
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
Default Re: RXV 6" lift

I had to remove the DS cable bracket and cut about 1/2 an inch or more out and weld back together and the Instuctions say the DS brake cable needs to be rerouted but nothing about PS side which was tighter yet so they both need to be rerouted. And the rear wheels will need spacers probably 1 1/2 to 2 " to line up with the fronts. And put your cables back in the brackets before you tighten the blocks down.
JDC is offline   Reply With Quote
Old 08-18-2010, 09:14 PM   #4
NoTyme
Getting Wild
 
NoTyme's Avatar
E-Z-GO
 
Join Date: Jul 2010
Location: southeast Michigan
Posts: 87
Default Re: RXV 6" lift

Quote:
Originally Posted by JDC View Post
I had to remove the DS cable bracket and cut about 1/2 an inch or more out and weld back together and the Instuctions say the DS brake cable needs to be rerouted but nothing about PS side which was tighter yet so they both need to be rerouted. And the rear wheels will need spacers probably 1 1/2 to 2 " to line up with the fronts. And put your cables back in the brackets before you tighten the blocks down.
Can I ask you how you like the handling with the Jake's lift kit in place???
NoTyme is offline   Reply With Quote
Old 08-19-2010, 11:27 AM   #5
JDC
Gone Wild
 
Join Date: Jun 2009
Location: Ontario Canada
Posts: 180
Default Re: RXV 6" lift

Don't know I'm just the installer.
JDC is offline   Reply With Quote
Old 08-19-2010, 08:29 PM   #6
4mula1fan
Gone Wild
 
4mula1fan's Avatar
E-Z-GO
 
Join Date: Mar 2010
Location: Western KY
Posts: 218
Default Re: RXV 6" lift

The handling is very stable, once you get the alignment right. It is pretty "twitchy" till you get it set right. I love it!!
4mula1fan is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
monster club car 20" lift on 40" boggers Lifted Golf Carts
Club Car Gas Cart 7.5" A-arm Lift On 28" Mudlites For Sale Golf Carts and Parts
Will 23" Tires fit a 99' EZGO elec. w/jakes 5" lift Lifted Golf Carts
89" Marathon with 4" lift....can I fit 23" tires??? Electric EZGO
I want to raise my Jakes 6" lift another inch for a total of 7". Lifted Golf Carts


All times are GMT -5. The time now is 01:09 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.