|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-25-2020, 05:47 PM | #1 |
Not Yet Wild
Join Date: Apr 2015
Posts: 51
|
HD F&R switch install 92 ezgo marathon
1992 ezgo marathon, FSIP 500amp controller recently upgraded to 48volts. All was well! Installed an HD F&R switch I got from carts unlimited and now I have no motion. Solenoid clicks but no forward or reverse. I installed all cables as they were on the stock F&R switch. I’m stumped!
Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-25-2020, 05:57 PM | #2 | |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: HD F&R switch install 92 ezgo marathon
Quote:
Did you take one of the battery cables loose before you started, and if so did you reinstall it? Did you clock the cam. If the shaft came out and the cam moved it want run. It's not clocked to the right position. |
|
09-25-2020, 06:22 PM | #3 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: HD F&R switch install 92 ezgo marathon
Quote:
|
|
09-25-2020, 06:26 PM | #4 |
Not Yet Wild
Join Date: Apr 2015
Posts: 51
|
Re: HD F&R switch install 92 ezgo marathon
Ez585L
|
09-25-2020, 07:10 PM | #5 | |
Not Yet Wild
Join Date: Apr 2015
Posts: 51
|
Re: HD F&R switch install 92 ezgo marathon
Quote:
Don’t think the cam moved but won’t hurt to check. Thanks for the feedback! |
|
09-25-2020, 07:32 PM | #6 |
Not Yet Wild
Join Date: Apr 2015
Posts: 51
|
Re: HD F&R switch install 92 ezgo marathon
Scotty, do I need the jumper wire between the micro switches for
my application? |
09-26-2020, 09:48 AM | #7 |
Not Yet Wild
Join Date: Apr 2015
Posts: 51
|
Re: HD F&R switch install 92 ezgo marathon
Scrapped the jumper wire and we’re back up and running!
|
09-28-2020, 10:37 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: HD F&R switch install 92 ezgo marathon
Thanks for the update.
You may or may not use the red jump between the micro switches depending upon the function of ms4. If it is used to reduce reverse speed signal with the stock controller then no jumper is used. If it is used to reduce speed with the Alltrax SR controller and or to activate a reverse beeper then the jumper is used. I hope this helps |
09-28-2020, 12:27 PM | #9 |
Not Yet Wild
Join Date: Apr 2015
Posts: 51
|
Re: HD F&R switch install 92 ezgo marathon
👍 thanks Scotty. Reduce reverse with 500a FSIP controller.
|
09-28-2020, 12:58 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: HD F&R switch install 92 ezgo marathon
No jumper + 2 wires from the throttle potentiometer connect to reverse ms.
If you want the added function of a reverse beeper a double ms will have to be sourced from the old F&R, Ezgo dealer, or ? |
|
|
Similar Threads | ||||
Thread | Forum | |||
G16e ezgo hd switch install problem | Electric Yamaha | |||
Marathon Brake Switch - Easy Install | Electric EZGO | |||
Tryouts no to install radio to ignition switch in 2016 Ezgo TXT | Gas EZGO | |||
1993 EZGO Marathon Clone Install | Clone Engine Swaps | |||
1973 Ezgo Accelerator Switch Install | Gas EZGO |