|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
09-17-2023, 02:53 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2021
Location: SC
Posts: 45
|
Alltrax SR48500 conversion
About 8 months ago I put an SR48500 controller, with a sw202 revers contactor, MZJ400A solenoid, left in stock motor. and left it 36V and never an issue. I swapped out to 6 8 volts yesterday and put on the larger resistor on solenoid, everything is clicking but the motor isn't moving showing voltage for motor. Any thoughts
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-17-2023, 05:30 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,661
|
Re: Alltrax SR48500 conversion
Go in throught the Alltrax toolkit and see where your overvoltage cut out is set. Yes the controller is good for the 48 volts, but settings matter too.
|
|
|
|
|
09-18-2023, 11:24 AM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 72,958
|
Re: Alltrax SR48500 conversion
The SR controller has a LED status light. It will flash a trouble code when the cart fails to go. What is that code? (1 red-5 green etc)
The fault code explanations are listed in the operators manual. |
|
|
|
|
| Tags |
| yamaha g16 36 to 48v |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax sr48500 and sw 202 install help | Electric EZGO | |||
| Alltrax SR48500 | Electric EZGO | |||
| Alltrax sr48500 speed | Electric EZGO | |||
| Alltrax SR48500 | Electric EZGO | |||
| Alltrax SR48500 setup | Electric EZGO | |||
Linear Mode
