1971 Club Car Caroche Full Resto-mod

[seney2]

Hi guys and gals, Seney2 here, I have just finished fully restoring my Caroche.... I am located just outside Albany, NY

Do you want to own a truly unique and rare cart that NO ONE else has? This cart would cost over $10,000 to have built. There is over $4500 just in new parts and paint. PLUS the countless hours of labor. 100% Complete "Resto-Mod" This cart is basically BRAND NEW!

1971 Club Car "Caroche" 36 volt Golf Cart - Serial #K1598

EVERY INCH OF THIS CART HAS BEEN REBUILT WITH 2021 PARTS AND TECHNOLOGY!

Completely Rebuilt October 2021 with ALL NEW and up to date components.

This cart has been taken down to the bare frame and rebuilt with all BRAND NEW parts and a MODERN electrical drive system. The only thing that is 1971 is the frame and body. The aluminum frame has been acid bathed and is in great condition.

- Brand New Golf Cart Batteries (with receipt for warranty)
- Brand New 4 Gauge Welding Wire Battery Cables
- Brand New D&D ES-85A-48 Motor - Manufactured 09/30/2021
- Brand New Curtis SepEX 500 amp Programmable Controller
- Brand New On the Fly "NORMAL TO SPEED" Switch
- Brand New Curtis Heavy Duty Solenoid
- Brand New Throttle System
- Brand New Wiring - EVERY CABLE & WIRE IS BRAND NEW
- Brand New 36 volt -18 Amp ON BOARD Battery Charger
- Brand New Battery Hold Down Brackets
- Brand New Charger Receptacle
- Brand New Battery Gauge
- Brand New Custom 12" Wheels and Radial Tires
- Brand New 2" Rear Wheel Spacers for a Wider "Hot Rod" Stance
- Brand New Brakes - Yes - The Parking Brake Works!
- Brand New Front Seats
- Brand New Custom Made Rear "Jump" Seat
- Brand New Matching Steering Wheel and Chrome Hub
- Brand New Custom Marine Flooring
- Brand New Front and Rear LED Lights
- Brand New Club Car Key Switch and Keys
- Brand New Paint
- Regenerative Braking (Let off the throttle and the cart stops itself)
- Custom "Sport" Windshield
- Every Bushing checked and replaced if needed
- Rear Differential Fluid Changed with Synthetic Fluid
- Steering and Suspension is Tight and Straight

Price is $6500

[seney2]

Few more pictures

[CP241]

Very, very cool. I just picked up a caroche myself and have similar ideas for how I’m gonna build it… I’d be interested to know more about the motor setup. Is that a custom motor to use with that original rear end, or did you fab an adapter plate? How did you interface internal to external spline?

Also how did you change the throttle from microswitches to a pot for the controller?

[seney2]

The motor I ordered bolted right in. I also ordered a controller, wiring harness and pot box throttle from the same place. The conversion was VERY simple and a huge difference in performance. I'm not sure if I can post where I purchased the "kit" from. But if you private message me I will give you the contact info.

[seney2]

Cart has been updated to 48 volt with new 48 volt on board charger.\

Cart now runs 25+ mph.