|
12-09-2010, 11:12 AM
|
#1 |
|
Gone Wild
 Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
9"Ford set up
I have never seen close up pics of a 9"Ford in a Sparky.The motor has to mounted to rear for bearing support of the armature.??Yes ??Just wondering Dave
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-09-2010, 11:52 AM
|
#2 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 9"Ford set up
|
|
|
|
|
12-09-2010, 12:17 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: 9"Ford set up
RIB,is that the set up they are currently running in the 9" drag carts? I assume there is a series of gears or chain in the housing,that thing looks like a heavy monster for a cart.Dave??
|
|
|
|
|
12-09-2010, 12:24 PM
|
#4 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 9"Ford set up
I'm not sure how they work, he said something about gear reduction, cwayaustx posted this the other day
|
|
|
|
|
12-09-2010, 05:46 PM
|
#5 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: 9"Ford set up
Taylor-Dunn's could have been "gear/chain" or 3 belt driven. I think PQ and GB are running modified ford 9 inch with sparkie motors.
|
|
|
|
|
12-10-2010, 12:48 AM
|
#6 |
|
Gone Wild
Join Date: Mar 2009
Location: At the race track(Texas)
Posts: 946
|
Re: 9"Ford set up
    I bolted my moter Stright to the 9'' rear end.. With a 4:11 Gear.... |
|
|
|
|
12-10-2010, 08:04 AM
|
#7 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: 9"Ford set up
GB,thanx for the pics your builds are far out!!!Questions if you don't mind?I can see the 4 bar so it will be suspended,is the motor solid mounted ??The coupler I'm sure had to be machined,and the motor must have it's own bearing support? If what I think I see is correct how does the whole deal work with out a drive shaft ?Thanx in advance,I think old Super Gas racer is getting the itch!!!Dave
|
|
|
|
|
12-10-2010, 08:32 AM
|
#8 | |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 9"Ford set up
Here's some pics of the rear end set up
http://www.buggiesgonewild.com/golf-...ag-cart-9.html Quote:
|
|
|
|
|
|
12-10-2010, 09:15 AM
|
#9 |
|
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: 9"Ford set up
Thanx Rib,think I got it ,the rear is solid/floater/4 bar adjustable.I,m sure GB will weigh in when the sun comes up in Texas.Dave
|
|
|
|
|
12-11-2010, 05:54 AM
|
#10 | |
|
Gone Wild
Join Date: Mar 2009
Location: At the race track(Texas)
Posts: 946
|
Re: 9"Ford set up
Quote:
  We had to make a sleeve to weld the male spline to before we could make the connection between the motor & the rearend..    A cradle was built to support the motor to a fixed position.. The motor is bolted to the cradle & the cradle is welded to the rearend...  The rearend bolts to a 4 link & a sliding wishbone held up by coil over shocks... Dave. Hope this answers your question... I would love to see you get involved. I’m sure you can take us to the next level.. There is four of us building drag carts with the ford 9'' rear end. Come May 14 2011 in Pageland South Carolina these carts will all meet for the first time... And they will be turned on turned up & turned loose... |
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| "slow" Precedent "need Speed" | Gas Club Car | |||
| Reverse rotation ring and pinion for ford 9" | Side x Sides/ATVs/Quads/Bikes/Jeeps/4x4's! | |||
| Wheels and Tires in So Cal 22" paddles on Douglas, 25" Dunlop on ITP, 27" ITP's | Golf Carts and Parts | |||
Linear Mode
