03-25-2021, 08:59 PM | #1 |
Not Yet Wild
Join Date: Jan 2021
Posts: 2
|
Tomberlin emerge moves then stops
Tomberlin emerge fault code 12
2009 tomberlin emerge, moves few feet, then dies like a short, I have replaced ITS throttle, motor, battery cables. Trojan batteries less than year old. Any help please....fault code 12 Last edited by JLB1115; 03-25-2021 at 09:01 PM.. Reason: Adding |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2021, 05:29 PM | #2 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,964
|
Re: Tomberlin emerge moves then stops
Fault code 1,2 flashed by the controller is ' the sliding signal of accelerator is outside the scope '. You say, that you've changed the ITS sensor, so check the voltage range produced by the ITS. The procedure should described in the owners manual, which you'll find here >
https://drive.google.com/file/d/1Z5D...ew?usp=sharing Is the installed ITS the correct one (0 - 5v)? Easyest way to messure/calibrate the ITS is done with a Curtis handset. |
03-28-2021, 04:10 PM | #3 |
Not Yet Wild
Join Date: Jan 2021
Posts: 2
|
Re: Tomberlin emerge moves then stops
Ended up being safety switch on charger shorting out.
|
Tags |
fault code 12, tomberlin |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Tomberlin Emerge 500 goes for 3 seconds then stops | Tomberlin | |||
Tomberlin Emerge | Tomberlin | |||
Tomberlin Emerge 48SS | Tomberlin |