92 club car clicks but wont move

[retacon]

http://s153.photobucket.com/albums/s...t=DSC00675.jpg

Working link! As i quoted before..this is the only solenoid I can find or hear "click".

[scottyb]

Okay now check the micro switches on the F&R are they working? Test them with your meter.... put your neg probe on the battery pack negative and test a micro switch for pos? when you find it flip the switch and hear the switch 'click' then test to see if the power goes thru it now? Like that

1 solenoid is all you got on this cart....

[retacon]

Im sorry I'm so new to golf carts...but a micro switch? I see the two cables bolted to the back of the f/r lever. Where is it from there?

[scottyb]

They are the small switches on top of the F&R ....... they have small wires going to them...... they are on/off switches. You are in over your head but, lets see what we can find out

[retacon]

Originally Posted by scottyb

They are the small switches on top of the F&R ....... they have small wires going to them...... they are on/off switches. You are in over your head but, lets see what we can find out

Beginning to realize that!!

Ok so here are my readings.

ALL WITH THE PEDAL NOT PRESSED in the FORWARD POSITION

Red/White ( Top Right wire) 13.3 V
White ( Top Middle wire) 12.3 V
Black/White ( Top Left wire ) 12.3 V
Black ( Bottom Right wire ) 12.4 V
Green ( Bottom Left wire ) 12.3 V

ALL WITH PEDAL PRESSED in the FORWARD POSITION

13.3 V
12.3 V
24 V
4 V
24 V

ALL WITH PEDAL NOT PRESSED in the REVERSE POSITION

13 V
13 V
13 V
13 V
13 V

ALL WITH PEDAL PRESSED in the REVERSE POSITION

13 V
13 V
24 V
10 V
24 V


I do know that the far right bottom cable is disconnected because it is the buzzer wire.

[scottyb]

Okay how many mnicros are there? 3? how many click when you select forward? 1? Lets verify that 1 works and just test in forward It has 2 wires.... one is power in the other is the same power out. It is an interrupter switch .... can you verify power comes in and does not go out ( thru the switch) until the forward selector trips the switch?

[retacon]

Originally Posted by scottyb

Okay how many mnicros are there? 3? how many click when you select forward? 1? Lets verify that 1 works and just test in forward It has 2 wires.... one is power in the other is the same power out. It is an interrupter switch .... can you verify power comes in and does not go out ( thru the switch) until the forward selector trips the switch?

http://s903.photobucket.com/albums/a...icroswitch.jpg


Red or Blue =D

[retacon]

Ok, checked them both. The wire readings I got from the microswitch are the readings I posted before. If I'm supposed to be checking the three metal prongs that I assume are the switchs, then I don't get power anyway I check it. In neutral, I get a reading of 0 V. In the forward position I get a reading of 0 V. When I put the cart in the forward position, 1 switch clicks and then I hear the solenoid click. Then nothing :(