|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-19-2021, 11:01 PM | #11 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: Just installed Duromax 440 in my G2, idle creep problem
Also, this thread really should be in the Clone or Big Block section correct?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-19-2021, 11:58 PM | #12 |
Not Yet Wild
Join Date: Sep 2021
Posts: 14
|
Re: Just installed Duromax 440 in my G2, idle creep problem
Something else you can do is rig up some kind of brake at the secondary clutch to stop it from spinning at idle. I`ve seen some brakes where its a bicycle disk and caliper adapted to the clutch, or a bicycle cantilever brake where the rubber brake pad presses on the belt at the secondary clutch or a lever brake with brake shoe where the secondary clutch itself acts like a brake drum. I`ve experienced these clutch braking systems with old amphibious AATV`s.
|
12-22-2021, 11:15 AM | #13 |
Not Yet Wild
Join Date: Dec 2021
Posts: 7
|
Re: Just installed Duromax 440 in my G2, idle creep problem
thanks guys yeah i have like 3.25" deflection lol. my father in law has an old timer analog rpm gauge like this one. you just press it against the shaft and watch it spin for 30 seconds or a minute, i made a video while i did it so i could be sure. I think ill order that carb, any recommendations on what else i need? what size air filter do i need? sounds like ill need to make an airbox too.
|
12-22-2021, 11:27 AM | #14 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: Just installed Duromax 440 in my G2, idle creep problem
You can use the stock unit or any one of the K&N type units with an adapter for the 390 clones sold by VC,NR or EC. All depends on the space you have. Another good idea is one of the ElCheapo digital tach sold on EBay.
|
12-22-2021, 11:33 AM | #15 |
Not Yet Wild
Join Date: Dec 2021
Posts: 7
|
Re: Just installed Duromax 440 in my G2, idle creep problem
|
12-22-2021, 01:07 PM | #16 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: Just installed Duromax 440 in my G2, idle creep problem
Looks like a Clean install
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
idle problem | Big Block Talk! | |||
18 hp vanguard idle down problem | Big Block Talk! | |||
83 Cushman idle problem | Gas golf carts | |||
16 HP Duromax manifold problem | Big Block Talk! | |||
Idle problem | Gas Club Car |