thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!!

FireBall · 09-24-2009, 02:41 AM

Just want some input on this
i've been looking at the 35hp briggs engines and was kinda curious if it would be possible to stuff one in a 91 club car carry all 2.....i'm putting a 7.5 supersport lift on it.......wt else would be needed to stuff a beast like that in it? lol
any input or help would be great thx

K-DAWG · 09-24-2009, 05:41 AM

It would be cool if you did it.

scottyb · 09-24-2009, 06:03 AM

I can't remember anyone doing a build thread on one that large? Is it the same height as the 23 hp because height may be an issue? You will need an engine cradel. An 1190 Comet. The usual Rewiring, an ignition switch, What does it weigh? You may need to rework the suspension and you might also consider some seriuos stopping power improvements...... OR just go with a Vanguard kit from CPP

WickedCarts · 09-24-2009, 10:04 AM

hey scotty the 35 hp is a taller motor its a 1000 cc

scottyb · 09-24-2009, 10:06 AM

I was pretty sure it was, but i dunno the measurements.

FireBall · 09-24-2009, 12:07 PM

28" high
21" wide

and it weighs 200 pounds

monster engine i know

but kinda want to make this thing into a monster and i want lots of power
not speed power but torque power
might just go with a kit from tom
maybe a 23hp with cam and rev kit
lol probably would come out alot better

smallblock450sl · 09-25-2009, 06:16 PM

Quote:

Originally Posted by FireBall

28" high
21" wide

and it weighs 200 pounds

monster engine i know

but kinda want to make this thing into a monster and i want lots of power
not speed power but torque power
might just go with a kit from tom
maybe a 23hp with cam and rev kit
lol probably would come out alot better

That 35 would be cool

The 23 with a cam and rev kit (throw in the advanced timing key) and some seconday clutch work and you'll have one "big" torque monster

Probable less than that 35 would run you. Good luck Dave Show some build pics!

FireBall · 09-25-2009, 07:40 PM

I can get the 35 for lke $2,000 brand new...anybody think thats a good price or to high?

shawn.m · 09-27-2009, 04:40 PM

normal price- their was a build with a 35hp on bgw. except he used the liquid cooled motor. Frank at alpha motors has a air cooled 35hp pumped to 50hp

scottyb · 09-27-2009, 04:45 PM

I think the 23s are plenty big enough

09-24-2009, 02:41 AM	#1
FireBall Getting Wild Join Date: Dec 2008 Location: South Carolina Posts: 137	thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! Just want some input on this i've been looking at the 35hp briggs engines and was kinda curious if it would be possible to stuff one in a 91 club car carry all 2.....i'm putting a 7.5 supersport lift on it.......wt else would be needed to stuff a beast like that in it? lol any input or help would be great thx

09-24-2009, 05:41 AM	#2
K-DAWG Gone Wild Join Date: Mar 2009 Posts: 256	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! It would be cool if you did it.
K-DAWG Gone Wild Join Date: Mar 2009 Posts: 256

09-24-2009, 06:03 AM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! I can't remember anyone doing a build thread on one that large? Is it the same height as the 23 hp because height may be an issue? You will need an engine cradel. An 1190 Comet. The usual Rewiring, an ignition switch, What does it weigh? You may need to rework the suspension and you might also consider some seriuos stopping power improvements...... OR just go with a Vanguard kit from CPP

09-24-2009, 10:04 AM	#4
WickedCarts NOT a Sponsor Join Date: Jan 2009 Location: So CAL Posts: 2,147	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! hey scotty the 35 hp is a taller motor its a 1000 cc

09-24-2009, 10:06 AM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! I was pretty sure it was, but i dunno the measurements.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-24-2009, 12:07 PM	#6
FireBall Getting Wild Join Date: Dec 2008 Location: South Carolina Posts: 137	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! 28" high 21" wide and it weighs 200 pounds monster engine i know but kinda want to make this thing into a monster and i want lots of power not speed power but torque power might just go with a kit from tom maybe a 23hp with cam and rev kit lol probably would come out alot better

09-25-2009, 07:40 PM	#8
FireBall Getting Wild Join Date: Dec 2008 Location: South Carolina Posts: 137	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! I can get the 35 for lke $2,000 brand new...anybody think thats a good price or to high?

09-27-2009, 04:40 PM	#9
shawn.m Gone Wild Join Date: Aug 2007 Location: near sacramento,ca Posts: 1,895	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! normal price- their was a build with a 35hp on bgw. except he used the liquid cooled motor. Frank at alpha motors has a air cooled 35hp pumped to 50hp

09-27-2009, 04:45 PM	#10
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: thinking about trying to stuff a 35hp briggs in my carryall 2 HELP!! I think the 23s are plenty big enough

Similar Threads
Thread	Forum
35hp billet long rods	Big Block Talk!
Briggs 35hp blowing smoke at high rpm	Big Block Talk!
Thinking of buying an 01 Carryall I 48V with Curtis Cab	Electric Club Car
35hp Briggs in a 93 Club Car....need some advice	Big Block Talk!
35HP Big Briggs Parts???	Big Block Talk!