lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-23-2023, 09:23 PM   #11
vk4444
Not Yet Wild
 
Join Date: Nov 2022
Posts: 11
Default Re: NEOS 48M350B programming cable problem

Is anyone able to send me the progam to the NEO's?
vk4444 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-10-2023, 05:54 AM   #12
raed
Not Yet Wild
 
Join Date: May 2016
Posts: 43
Default Re: NEOS 48M350B programming cable problem

Quote:
Originally Posted by BobInDaytona View Post
In the FTDI Program, mine shows up, starting with Chip Type, and ending at EEPROM Type:

FT245R
0x0403
0x6001
CANUSB
LW0GQxxx
LAWICEL
0x131
Internal EEPROM

Not sure what the software is actually looking for. I think you can edit
one or more of these...
Thanks a lot my friend for your effort with me!
I try all my best but the adapter I have not work at all with the Tune program, so I ordered The USBCAN adapter from LAWICEL(cost me around 250$ with shipping and customs) then download the driver and wire it to the controller and works fine.
So thanks a lot for your time.

But as an Embedded System developer, I will listen to CAN bus and see why other adapter does not work with this program.
raed is offline   Reply With Quote
Old 03-10-2023, 06:08 AM   #13
raed
Not Yet Wild
 
Join Date: May 2016
Posts: 43
Default Re: NEOS 48M350B programming cable problem

Quote:
Originally Posted by vk4444 View Post
Is anyone able to send me the progam to the NEO's?
Done, see your DM
raed is offline   Reply With Quote
Old 08-31-2023, 05:55 AM   #14
Remon
Not Yet Wild
 
Join Date: Aug 2016
Posts: 2
Default Re: NEOS 48M350B programming cable problem

hi
did any one send you Neos software .. can you please forward a link
Remon is offline   Reply With Quote
Old 11-14-2023, 10:01 PM   #15
ATrain
Gone Wild
 
Join Date: Oct 2012
Location: SoCal
Posts: 682
Default Re: NEOS 48M350B programming cable problem

Quote:
Originally Posted by raed View Post
Any help will be appreciated
I have also mcp2515 which I can connect with Arduino to be seen as a COM port. But I think the adapter I have must work with the correct configuration, or do I need to buy CANUSB from LAWICEL?
https://www.canusb.com/sales/

Thanks in advance!
I've said it a bunch elsewhere, but YES you need to buy that specific CANUSB from LAWICEL.

It sucks, but that CANUSB comes with DLL's that make things easier for ICON to develop. The only way around that device is decompiling and rewriting the ICON Tune software to communicate over a different CANBUS.

Just think of it like the standard CANUSB protocol is like binary 01010101 and ICON chose to use a specific CANUSB device that comes with helpers so they don't need to program directly in binary but instead can program at a higher abstraction layer and say "writeToDevice("MAX RPM", 7000);".

It makes it easier for ICON but locks the software to that device.
ATrain is offline   Reply With Quote
Old 01-10-2024, 06:14 PM   #16
Wtg200
Not Yet Wild
 
Join Date: Jan 2024
Posts: 2
Default Re: NEOS 48M350B programming cable problem

Could someone please send me and updated version of the NEOS controller software download link? Thank you in advance!
Wtg200 is offline   Reply With Quote
Old 01-10-2024, 06:16 PM   #17
Wtg200
Not Yet Wild
 
Join Date: Jan 2024
Posts: 2
Default Re: NEOS 48M350B programming cable problem

Could you also send me an updated neos software link as well? I would greatly appreciate it!
Wtg200 is offline   Reply With Quote
Old 09-08-2024, 07:03 AM   #18
JFBY
Not Yet Wild
 
Join Date: Sep 2024
Posts: 6
Default Re: NEOS 48M350B programming cable problem

Quote:
Originally Posted by raed View Post
Done, see your DM
Hi, could you please share me the program use for neos controller?
JFBY is offline   Reply With Quote
Old 09-08-2024, 11:57 AM   #19
JFBY
Not Yet Wild
 
Join Date: Sep 2024
Posts: 6
Default Re: NEOS 48M350B programming cable problem

Quote:
Originally Posted by ATrain View Post
I've said it a bunch elsewhere, but YES you need to buy that specific CANUSB from LAWICEL.

It sucks, but that CANUSB comes with DLL's that make things easier for ICON to develop. The only way around that device is decompiling and rewriting the ICON Tune software to communicate over a different CANBUS.

Just think of it like the standard CANUSB protocol is like binary 01010101 and ICON chose to use a specific CANUSB device that comes with helpers so they don't need to program directly in binary but instead can program at a higher abstraction layer and say "writeToDevice("MAX RPM", 7000);".

It makes it easier for ICON but locks the software to that device.
Hi Atrain, could you please share with me the program used for the Neos controller tune 7000?

JFBY25[at]proton[dot]me
JFBY is offline   Reply With Quote
Reply

Tags
48m305, cable, neos, toyota
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Thread Tools
Display Modes


Similar Threads
Thread Forum
2022 Icon programming cable Icon
NEOS/ICON Programming Software Troubleshooting Icon
2022 Icon Programming Cable Icon
Programming Neos Question Icon
Does anybody know where to get this charger programming cable? Icon


All times are GMT -5. The time now is 06:48 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.