![]() |
|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
![]() I have a Taylor-Dunn 24v 3 wheel cart. The controller says 24-36v. Motor says 24/36/48v. My question is can I just change battery pack to 36v? Or does the controller need to be reset to 36v. And how much speed would I pick up. it only goes about 9mph now
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,962
|
![]() That controller should work on 36v without any program change. You will need a 36v solenoid and charger. Mathematically speed increase should equal the voltage increase. So where 36 is 50% more than 24 volts, the motor should theoretically spin 50% faster. Look for 35-40% in the real world of worn parts, and roll resistance.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
![]() Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
![]() Ok I knew I needed a 36v charger. Next question is it has 3 solenoids do I need to replace all 3 or just the main one? What do the other 2 do?
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
![]() Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
![]() Ok I see now the two bigger ones are contractors and smaller one is the solenoid. I Looked up data sheet on the contractors it says 6v-48v so I am thinking I am good on the contractors. What do the two contractors do ? One forward one reverse? I’ll get the part number off the solenoid tonight and look up the data sheet on it.
|
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
![]() Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
![]() When I go to 36v it doesn’t move contact or clicks no power to motor go back to 24 v works as should does the controller not to be set to 36v?
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
![]() Join Date: Apr 2011
Location: Saraband Alabama
Posts: 45
|
![]() Anyone know anything about going from 24v to 36v with this controller
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
96' Taylor Dunn B-248 | Members Rides | |||
72v Taylor Dunn | Electric EZGO | |||
Taylor Dunn 97 | Electric golf carts | |||
Taylor dunn 235 BN? | Electric golf carts | |||
Taylor-Dunn | Electric golf carts |