|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-09-2025, 07:07 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 288
|
broken lock on new "dash"
New dash is installed, and checking out the locks and one of them came apart!
The tumbler came out, and naturally the door is locked.  I can't get my hands into the compartment to release the lock from the inside. I hate to try & stick a screw driver in the door - don't want to bugger up the new dash. Open to suggestions |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-09-2025, 07:36 PM
|
#2 |
|
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 3,667
|
Re: broken lock on new "dash"
Crazy question, have you tried sticking the tumbler back in and working with it?
|
|
|
|
|
01-09-2025, 08:31 PM
|
#3 | |
|
Gone Wild
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 288
|
Re: broken lock on new "dash"
Quote:
|
|
|
|
|
|
01-09-2025, 08:54 PM
|
#4 |
|
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 3,667
|
Re: broken lock on new "dash"
What about spraying some lock eze graphite and working everything?
|
|
|
|
|
01-10-2025, 10:26 AM
|
#5 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,472
|
Re: broken lock on new "dash"
It looks like a slot in the back of the cylinder. Look in the back of the lock for a bar. If there use a pair of needle nose pliers and put them in there and twist. Should open. Once out take the lock out of the dash and see what is missing. You could also try putting the cylinder back in and twist slowly. May drop in and turn.
|
|
|
|
|
01-10-2025, 06:17 PM
|
#6 |
|
Gone Wild
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 288
|
Re: broken lock on new "dash"
Contacted seller, and thay are going to send another lock - maybe two!
 |
|
|
|
|
01-10-2025, 06:55 PM
|
#7 |
|
Born to be Wild
Join Date: Feb 2019
Location: Palm Harbor Florida
Posts: 3,667
|
Re: broken lock on new "dash"
That’s great but what good is that if you can’t get it open?
|
|
|
|
|
01-10-2025, 07:59 PM
|
#8 | |
|
Gone Wild
Join Date: Jul 2009
Location: Loveland, CO / Sun Lakes, AZ
Posts: 288
|
Re: broken lock on new "dash"
Quote:
 AND no damage to the dash. |
|
|
|
|
|
01-10-2025, 08:11 PM
|
#9 |
|
Gone Wild
Join Date: Sep 2018
Location: Md.
Posts: 1,115
|
Re: broken lock on new "dash"
What Kgsc said
The lock assembly turns the tab/ lever in the back of cylinder that locks tumbler assembly fits into. Turn that and glove box will open. Once open change the lock. The tumbler,key assembly only engages the latch inside the cylinder. Turning that latch is no different then useing key to turn latch. Look at back side of tumbler/ assembly and it should be apparent what engages glove box latch 😊 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Brakes lock up after installing a 4" Lift | Electric Club Car | |||
| Big "thank you!" to JohnnieB and Yurtle, was "EZGO TXT Non-PDS Help/Questions" | Electric EZGO | |||
| 2001 DS "bucks" or "jerks" at low speed... | Electric Club Car | |||
| Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
| Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO | |||
Linear Mode
