Wont Turn Over No Spark

[devildog0351]

I Have A G-2 That Will Not Turn Over Using The Gas Pedal.if I Cross Over The Starter Cyliniod It Does Turn Over But It Has No Spark. The Cyliniod(starter) And Pedal Switch Is New.

[smallblock450sl]

Originally Posted by devildog0351

I Have A G-2 That Will Not Turn Over Using The Gas Pedal.if I Cross Over The Starter Cyliniod It Does Turn Over But It Has No Spark. The Cyliniod(starter) And Pedal Switch Is New.

There is a "path" of voltage that runs in this order...Positive battery/fuse/wire harness/key switch/stop micro switch (activated when you push on the ecelerator pedal) then the solenoid. With a volt meter (positive lead on positive battery post) check for 12 volts (ground) at the small black wire at the solenoid. You should has 12 volts all the time, if not , a grond problem. With your (negative lead on battery ground) you can check voltage thru the fuse/ at the key switch/the stop switch (should have 12 volt on the brown wire going into the switch and only have 12 volts on the red and white lead when you push on the accel pedal) and fially at the small red and white wire at the solenoid. Hope this helps track down your problem. Dave

[devildog0351]

Thanks For The Info It At Least Gives Me Somewhere To Go.

[devildog0351]

I Made All The Checks Listed And Every Thing Checks Out Fine It Still Will Not Turn Over When Using The Gas Pedal. Any Other Ideas?????