|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
03-30-2008, 07:28 PM | #1 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
EZGO limo frame repair
Some of you old time BGWers may remember my seawashed rust bucket. I quickly knew what I was in for after pulling off the rocker panels.
http://www.buggiesgonewild.com/gas-e...limo-cart.html It's been eating away at me seeing a frame with so much potential just sitting there for over a year. So I thought what's a better way to start spring break than with some welding? Old piece cut off, 2" 11ga square tubing tacked in place. Hope you like my home made frame dolly. It works good!! Next was to section in a new piece for the back. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-30-2008, 07:29 PM | #2 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: EZGO limo frame repair
Old piece cut out, this one going in is from the middle part of the frame which was in good shape.
Finished!! Well at least with this one. I have the other side to do and the front upper frame rails. Off to the metal store! |
03-30-2008, 07:59 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: EZGO limo frame repair
Nice work man!!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-31-2008, 01:51 PM | #4 |
Home of the Teeny Weaney
Join Date: Dec 2007
Location: SW Mich.
Posts: 1,013
|
Re: EZGO limo frame repair
great job, XT
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G9 frame repair w/swing arm drop | Design Center | |||
clutch repair ezgo | Gas EZGO | |||
Club Car Limo | Members Rides | |||
Wanted: EZGO 6 Pass. Limo f/r cables | Golf Carts and Parts | |||
Limo | Golf Carts and Parts |