Help Installing oem usb in RXV 2015

[davidgolfer]

Ezgo RXV Freedom 2015
Lights but no turn signals
I recently purchased the new cup holder setup like the newer RXV’s
https://www.buggiesgonewild.com/showthread.php?t=175617
I have now bought the OEM USB unit to put in the console area. Currently have a plug under the cup holder that this plug fits but I think it is for the turn signals. Do I plug this into this? Is there a part I need in addition to this? Anyone know the answer? I was told I may need a usb electronic unit 10001356
USB ELECTRONICS.
Before I spend another $80 can someone confirm that this is what I need and tell me where this will plug into?

[RogerA]

Looks like just the addition that cup holder needs. Following to see how to install. How hard was it to remove the old cup holder? Did you remove the front cowl to make it all easier to do? Thanks!

[davidgolfer]

Originally Posted by RogerA

Looks like just the addition that cup holder needs. Following to see how to install. How hard was it to remove the old cup holder? Did you remove the front cowl to make it all easier to do? Thanks!

Haven’t installed cup holder yet. Waiting to get this so I can drill the hole before install. Removing old and install new should be just pull up and replace. No bolts or screws to remove. May have to trim a little to make it fit.
Have a new floor mat coming from cart mafia also. Waiting to get all parts in and move stereo to key console.

[RogerA]

Three small 10mm quick nuts on the bottom of the cup holder assembly hold it in place.

[davidgolfer]

Originally Posted by RogerA

Three small 10mm quick nuts on the bottom of the cup holder assembly hold it in place.

Sorry I forgot I took mine off and never put them back on

[cgtech]

Yes, you need the extra box. Then hook the box up to a 12v source (the loose black & yellow wires are 12v).

[RogerA]

Originally Posted by cgtech

Yes, you need the extra box. Then hook the box up to a 12v source (the loose black & yellow wires are 12v).

This loose black and yellow wire for 12v dc, is this in the center console/center dash area of all 2015 RXV Freedom 48 volt carts factory equipped with lights, horn, and signals? Is the YELLOW wire 12v positive and is the BLACK wire 12v negative? THANKS.

[tamebuggie]

Have you installed this yet davidgolfer? I'm looking to install the same cup holder on my rxv and already have a usb port in my existing cup holder. I'm curious where you are going to mount the usb port. Can you let me know how the cup holder install goes and where you install the port?

Thanks!!

[davidgolfer]

Originally Posted by tamebuggie

Have you installed this yet davidgolfer? I'm looking to install the same cup holder on my rxv and already have a usb port in my existing cup holder. I'm curious where you are going to mount the usb port. Can you let me know how the cup holder install goes and where you install the port?

Thanks!!

Plan on installing it to the right, just like in the new carts. Waiting on my new floor mat from golf cart mafia before I install. I have to move the stereo unit that is currently in cup holder unit

[cgtech]

Originally Posted by RogerA

This loose black and yellow wire for 12v dc, is this in the center console/center dash area of all 2015 RXV Freedom 48 volt carts factory equipped with lights, horn, and signals? Is the YELLOW wire 12v positive and is the BLACK wire 12v negative? THANKS.

Not every single "OEM lights" rxv has the yellow & black wires, but many do, located under the cupholders. Yellow +, black -.