|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2022, 08:55 PM | #1 |
Not Yet Wild
Join Date: May 2017
Posts: 57
|
2013 EZGO TXT48 Cart shudders but no movement
2013 EZGO TXT48
Cart shudders but won’t take off. Pack reading 50.2, load tested, and tested in a different cart, they are strong. Handheld is spitting out, “Field Missing”. I have replaced the F1 and F2 wires I have replaced the Motor I have replaced the Controller Still just shudders. Any ideas and help very much appreciated! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2022, 09:07 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,173
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
Verify field current.
|
09-26-2022, 10:05 PM | #3 |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
> deleted comment< I see you already covered that.
|
09-27-2022, 12:03 AM | #4 |
Not Yet Wild
Join Date: May 2017
Posts: 57
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
|
09-27-2022, 08:33 AM | #5 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,173
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
Ammeter. Or at least a voltmeter across F1 and F2 at the motor.
|
09-27-2022, 09:52 AM | #6 |
Not Yet Wild
Join Date: May 2017
Posts: 57
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
|
09-27-2022, 12:51 PM | #7 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,173
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
My Alltrax log shows my field current at between 5 and 6 amps when I first hit the pedal and the solenoid clicks.
|
09-27-2022, 01:42 PM | #8 |
Not Yet Wild
Join Date: May 2017
Posts: 57
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
Okay. I’m not sure how to measure that on the stock controller? Can you help me out with the procedure to check? And if it doesn’t check out, what should I look for? Other than the F1 and F2 cables, motor and controller im not sure what else to check.
|
09-27-2022, 02:11 PM | #9 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,173
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
If your diagnostics are correct, then you have checked everything that affects the Field. I don't recommend trying to measure the field current if your controller doesn't measure it for you. (My Alltrax does) Do not disconnect the field wires while the battery is connected or you will damage your controller. You can measure voltage across the F1, F2 though. I can't tell you what it should be with your setup.
|
09-27-2022, 02:17 PM | #10 |
Gone Wild
Join Date: Sep 2022
Location: Minnesota
Posts: 1,310
|
Re: 2013 EZGO TXT48 Cart shudders but no movement
Have you tried running the cart while it is on jack stands to see if the wheels will spin with no weight on them? It seems like based off your original post like you might not be getting voltage to both fields.
I am not sure if this is controlled by the controller or the solenoid however. In your OP I do not see any mention of you doing anything with the solenoid at all correct? |
Tags |
cart, ezgo, golf, rxv, txt |
|
|
Similar Threads | ||||
Thread | Forum | |||
2013 EZGO TXT48 Solenoid not activating | Electric EZGO | |||
36V EZGO PDS cart solenoid clicks but no movement | Electric EZGO | |||
Cart shudders and jerks when run | Electric Club Car | |||
'93 36V cart shudders | Electric Club Car | |||
Cart shudders and will not move. | Electric EZGO |