|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-20-2009, 10:08 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Santa Clarita, So. Cal.
Posts: 4
|
Installing new timing belt
I have an 02 TXT, and want to replace the timing belt. can I pull the drive clutch without pulling the motor?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-20-2009, 10:28 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 72,746
|
Re: Installing new timing belt
The shaft is about 2" long. I think if you can get the puller in there and get an air hammer on it then you can do it
 |
|
|
|
|
06-20-2009, 10:56 AM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Santa Clarita, So. Cal.
Posts: 4
|
Re: Installing new timing belt
Thanks for the info, need to buy a puller now!
|
|
|
|
|
06-20-2009, 06:20 PM
|
#4 |
|
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,476
|
Re: Installing new timing belt
If it is lifted then you may be able to cut the rear spring and shock on the driver side loose and jack the body up enough to get at the bolt with an impact.
|
|
|
|
|
06-20-2009, 06:40 PM
|
#5 | |
|
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Installing new timing belt
Quote:
 |
|
|
|
|
|
06-20-2009, 06:54 PM
|
#6 |
|
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Installing new timing belt
I pulled my ezgo clutch with a 2 inch fine thread 3/4 bolt and about a 5 inch 5/8rod. Put the rod in the clutch hole , screwed in the bolt and popped the clutch off. This cost me 4.50 at the local hardware store, so if in a bind and don't have access to the 30 plus dollar puller , hit the hardware store
Butch This is a quote from "EZ GO Gas Tech"... on the home page. Verify the model before you go spend your money. There's more info there...."Removing an EZ GO clutch" Hope that helps!  |
|
|
|
|
06-20-2009, 07:22 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Santa Clarita, So. Cal.
Posts: 4
|
Re: Installing new timing belt
It is good to be here!! THANKS everyone for the help those are some good ideas.
|
|
|
|
|
06-20-2009, 07:45 PM
|
#8 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Installing new timing belt
........... |
|
|
|
|
06-20-2009, 08:00 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 72,746
|
Re: Installing new timing belt
Thanks PM
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| timing belt | Gas EZGO | |||
| Old Gas EZ Go timing | Gas EZGO | |||
| timing | Gas EZGO | |||
| Cam Timing | Gas Club Car | |||
| EZGO Timing Belt | Gas EZGO | |||
Linear Mode
