Cart goes, slows down, foot off pedal goes again

[CP241]

You should have 48v on the light blue small wire at the solenoid.

You should have 48v negative at the blue/white wire. This is provided by the controller.

You’ll need to determine which is missing.

Do you have 48v at both sides of the run/tow switch? How about the key switch? Does reverse buzzer work when you shift to reverse?

[Beerman24]

Originally Posted by CP241

You should have 48v on the light blue small wire at the solenoid.

You should have 48v negative at the blue/white wire. This is provided by the controller.

You’ll need to determine which is missing.

Do you have 48v at both sides of the run/tow switch? How about the key switch? Does reverse buzzer work when you shift to reverse?

Will test tonight when back from work. I assume, testing is key on, run mode, pedal pushed?

I do know the reverse buzzer works though.

I appreciate you walking me through this!

[Beerman24]

Ok I’m and idiot!!!!!! In all this madness I forgot to plug the MCOR back in! Plugged ot in and guess what! It works! Holy dumb moment!!! I’m going to go have a cocktail!

Thanks all!!!!

[CP241]

Originally Posted by Beerman24

Ok I’m and idiot!!!!!! In all this madness I forgot to plug the MCOR back in! Plugged ot in and guess what! It works! Holy dumb moment!!! I’m going to go have a cocktail!

Thanks all!!!!

Happens to the best of us. Sometimes it’s best to take a step back for a day and try with a fresh look the next day (or sometimes a month later… been there )

Important thing is you got it going

[Beerman24]

Originally Posted by CP241

Happens to the best of us. Sometimes it’s best to take a step back for a day and try with a fresh look the next day (or sometimes a month later… been there )

Important thing is you got it going

Yup! Thanks for the help!! I’m normally pretty good with these but this had be in a mind daze, then then it was there! Blatantly obvious why it won’t go anywhere lol!!