|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-27-2023, 04:33 PM | #1 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
alltrax spm48225
Trying to wire this controller. My stock controller had a cable from position c on f/r switch to a2 on the controller. The wiring diagram for the Alltrax does not show the cable. Does this cable get eliminated? This on a 95 Medalist.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-27-2023, 04:56 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: alltrax spm48225
When going from a 4 terminal control to a modern 3 terminal control, Controller terminal A2 is eliminated.
The 2 cables that went to Controller A2 now splice and make one cable from the motor to the F&R going around the controller. |
01-27-2023, 05:09 PM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: alltrax spm48225
On my f/r switch terminal c I have one cable going to motor and another going to controller. So you are saying the cable should have went to controller then to motor. Regardless, I will follow diagram.
|
01-30-2023, 06:19 PM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: alltrax spm48225
I have the controller and mzj-400a solenoid mounted and am getting it wired. I am using the SPM to EZGO TXT diagram. My old solenoid has a blue wire on the large battery side terminal and a black wire on the small neg side small teminal neither are shown on this diagram. Do I need them and what are they for. There were 2 black wire on that terminal but one is now going to the controller relay coil - terminal.
|
01-30-2023, 09:22 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: alltrax spm48225
So according to a post by JohnnieB, the blue wire is the KSI voltage source. Do I still need this wire? The Alltrax spm controller has a red wire on the KSI terminal going to positive small terminal on solenoid.
|
02-01-2023, 10:08 AM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: alltrax spm48225
I guess I will leave them off and see what happens. If it dont go I will attach 1 wire at a time. Just dont want to ruin any components. If it were easy anybody could do it. Any suggestions, Im all ears.
|
02-01-2023, 10:25 AM | #7 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: alltrax spm48225
|
02-01-2023, 11:28 AM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: alltrax spm48225
That drawing isnt even close to what I have, even the large cables are different. I think I should use the 1994.5 - present. Also, my cart has the 4 wire plug going to the controller with wire colors red,black,white and orange if that matters.
|
02-01-2023, 11:39 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: alltrax spm48225
You may be overthinking this making it more difficult than necessary.
All the controllers and solenoids have the same basic connections. There is more than one way to make this cart work - which is why you see conflicting diagrams. Simply pic an Alltrax diagram and follow it entirely. Meaning don't use part of this and part of that diagram. Here is one below that will work. Simply ID the B- B+ M- terminals on your control. let the pedal switch power the solenoid and the control and plug in the throttle wires. |
02-01-2023, 12:18 PM | #10 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: alltrax spm48225
Well I am following the drawing from Alltrax for the SPM to E-Z-GO TXT 1994.5- Present. If you look at that drawing, there is no blue wire going to battery side on solenoid. If indeed this blue wire powers the KSI do I also use the red wire going from +side small terminal on solenoid to the Alltrax controller KSI terminal. That is my concern. So if I follow this diagram I should leave the blue and black wires off. My cart also does not have the third wire for the charging port just the 2 large wires,SB50. Not trying to over think this just trying to not screw something up.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Alltrax XCT 400amp, Alltrax FN2 switch and Factory Motor | Golf Carts and Parts | |||
Alltrax XCT 400amp, Alltrax FN-KS switch and Factory Motor | Golf Carts and Parts | |||
Alltrax XCT 400amp, Alltrax FN-KS switch and Bandit motor | Golf Carts and Parts | |||
Going 48 volt alltrax spm48225 | Electric EZGO | |||
Swapping Alltrax AXE 7245 450a for Alltrax SR 72500 500a | Electric EZGO |