11-29-2014, 01:21 PM | #1 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
clone throttle
I thought I would post how the way a rigged my throttle still coming off governor.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2015, 11:26 AM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone throttle
Bump
|
06-28-2015, 08:26 PM | #3 |
Getting Wild
Join Date: Feb 2014
Location: Superior Wi
Posts: 137
|
Re: clone throttle
on my G14 I just used the longer cable from a G16, was the proper length from the gov. to the clone linkage.
|
06-29-2015, 10:25 AM | #4 |
Getting Wild
Join Date: Jun 2014
Posts: 142
|
ImageUploadedByTapatalk1435591488.970169.jpg
92 marathon.. Used the factory cable and part of the original bracket Sent from my iPhone using Tapatalk |
11-16-2015, 06:01 PM | #5 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone throttle
Bump for kustrud
|
12-09-2015, 09:50 AM | #6 |
Getting Wild
Join Date: Nov 2015
Location: Pelion SC
Posts: 85
|
Re: clone throttle
Here is how I set my gokart up. I removed governor arm and welded a bracket onto the original throttle arm. Made direct throttle linkage from a TIG welding rod (3/32" I think). Then I made a bracket to attach to one of the fuel tank bolts. |
01-28-2016, 10:42 PM | #7 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone throttle
Bump for Jim
|
04-20-2016, 12:35 PM | #8 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone throttle
Bump
|
04-23-2016, 02:30 PM | #9 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: clone throttle
I made levers then mounted them to my clone and put the factory G9 cables onto the levers to run stuff. As seen here, though the plate is mounted levers down so you can't see it that well. This makes the factory pedal and choke pull full travel to the full travel on the carb and choke. Some levers have multiple holes to adjust or adjust the return spring tension. IIRC the choke had to be reversed so the cable is mounted opposite side and throttle is not. Those welds are called 2 second eyes closed mig welds lol.
http://www.buggiesgonewild.com/clone...lone-bb-3.html |
08-16-2017, 07:58 PM | #10 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone throttle
Bump for Gearheaddiver
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Pics of your clone throttle linkage plz | Clone Engine Swaps | |||
EZ GO clone throttle linkage help!!!!!!! | Clone Engine Swaps | |||
420CC clone throttle linkage | Big Block Talk! | |||
Throttle hooked to governor linkage on clone | Clone Engine Swaps | |||
Clone throttle linkage help! | Clone Engine Swaps |