|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-04-2018, 11:53 AM | #1 |
Wild Gone
Join Date: Oct 2016
Location: Davie, FL
Posts: 633
|
2012 RXV brake problem - Curtis Controller
Helping a friend with his locked up RXV brake. I am following the RXV 48v AC Curtis Advanced Trouble-Shooting Guide.
Step 1 - Failed: Cart does not roll with key off and switch in tow position. Step 2 - Failed: Checked wires to brake and no voltage observed in either run or tow with key in any position. Step 3 - Passed: Reading 25.5 ohms on the brake coil The cart's brake lights stay on when key is turned on, I think this means it is failing the Controller startup test of the brake. Anybody have advice how/where to troubleshoot no voltage on the brake wires? |
|
|
Similar Threads | ||||
Thread | Forum | |||
2012 RXV brake problem | Electric EZGO | |||
EZGo RXV 2012 and Curtis 1206AC direct swap to Lifepo4 | Electric EZGO | |||
Curtis Controller and rear end problem | Electric EZGO | |||
2012 Club Car brake light switch under brake pedal pad | Electric Club Car | |||
club car/curtis speed controller problem / ? | Electric Club Car |