|
|
|||||||
| Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
  |
|
|
Thread Tools | Display Modes |
10-13-2019, 12:01 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2019
Posts: 9
|
Power to frame Troubleshooting
I've got a Titan Scout E4 which is a 72v electric utv.
recently had the motor professionally rewound/rebuilt I've got 72v to the frame with no apparent wiring frayed. What do you suggest i do to troubleshoot? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-13-2019, 02:54 PM
|
#2 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Power to frame Troubleshooting
You need to make sure that the batteries are clean and your not getting bleed off into the frame. You then need to disconnect motor wires and see if the voltage is still in the frame. If so, problem is in the motor.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Troubleshooting 1206MX for 42V Cart with no Solenoid Power | Electric EZGO | |||
| TXT Troubleshooting - No Power | Electric EZGO | |||
| Troubleshooting power drive 2 charger | Electric Club Car | |||
| G16 low power going uphill -> Need help troubleshooting | Gas Yamaha | |||
| Accu Power Charger Troubleshooting | Electric Club Car | |||
Linear Mode
