|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
12-18-2010, 01:38 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2009
Location: Queen Creek, AZ
Posts: 54
|
Help with my honda 24hp?
So i found out my Honda 24hp has a broken exhaust valve and bend push rod... So i thought that was it and ordered new valve and push rods gaskets then i noticed i was missing a cam lifter which made my rod all loose not in place Iam hoping its just fell out of place and no damage in the block! So my question has anyone opened up one of these motors before looks easy to remove side cover and clutch and get to it?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-20-2010, 11:11 AM
|
#2 | |
|
Gone Wild
 Join Date: Mar 2009
Posts: 211
|
Re: Help with my honda 24hp?
Quote:
Once you pull the side cover off, you can just pull out the cam shaft and check the lifters and followers. Look at the parts manual at the top of this section for an exploded diagram. Be sure that when you replace the cam you line up the dot on the cam with the dot on the crank. Really simple |
|
|
|
|
|
12-20-2010, 11:55 AM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2009
Location: Queen Creek, AZ
Posts: 54
|
Re: Help with my honda 24hp?
Thanks turbo ill check it out tonight
|
|
|
|
|
12-20-2010, 03:27 PM
|
#4 |
|
Gone Wild
Join Date: Mar 2009
Posts: 211
|
Re: Help with my honda 24hp?
When you put it back together valve clearances are
Intake ( 0.006 +/- 0.001in ) Exhaust ( 0.008 +/- 0.001in ) |
|
|
|
|
12-21-2010, 10:42 PM
|
#5 |
|
Not Yet Wild
Join Date: Dec 2009
Location: Queen Creek, AZ
Posts: 54
|
Re: Help with my honda 24hp?
And my GOVERNOR ASSY is broken too!!
|
|
|
|
|
12-21-2010, 11:24 PM
|
#6 | |
|
Gone Wild
Join Date: Mar 2009
Posts: 211
|
Re: Help with my honda 24hp?
Quote:
I've had the stock governor gear explode around 6500- 7000 I usually remove the plastic gear on anything I plan to hot rod. You can replace it, or use a rev limiter or throttle stop. |
|
|
|
|
|
12-21-2010, 11:32 PM
|
#7 |
|
Not Yet Wild
Join Date: Dec 2009
Location: Queen Creek, AZ
Posts: 54
|
Re: Help with my honda 24hp?
Yea i was revin it when it broke... i was thinking of just getting the oem its like 13 bucks what r u using on yours?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 24Hp honda blown? | Big Block Talk! | |||
| Honda 24hp part? | Big Block Talk! | |||
| 24hp honda advise | Gas Club Car | |||
| G1 24hp Honda rear end? | Gas Yamaha | |||
| Cam for 24hp honda?? | Big Block Talk! | |||
Linear Mode
