lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-23-2016, 09:16 PM   #1
fastxcr
Not Yet Wild
 
Join Date: Mar 2010
Posts: 29
Default 89 EZ-GO 48 Volt upgrade question

Currently in phase 2 of my upgrades on my 89 EZ GO. Few years ago did cable upgrade, HD fwd and reverse, bigger solenoid and 500 amp controller from Scotty B.

Well this year going to 48 volt so got batteries and guy bought them from put them in but he did not hook solenoid in. I sent Scotty a e-mail but since weekend thought would post here to.

Issues. Solenoid seems to be hitting case and cables to small for solenoid which looks like 7/16. There enough room to drill out lug of make new cable. Any advice on solenoid mounting.
Attached Images
File Type: jpg cart1.jpg (74.1 KB, 0 views)
File Type: jpg cart 2.jpg (126.0 KB, 0 views)
fastxcr is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-23-2016, 09:25 PM   #2
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,125
Default Re: 89 EZ-GO 48 Volt upgrade question

You have to move that solenoid away from the metal case or you will have a possible short to the case when you mount the cables. That small wire probably goes on the small terminals. Yes the big terminals are larger than stock. I had Scottyb make me cables with the proper lugs on them.
Volt_Ampere is offline   Reply With Quote
Old 04-23-2016, 09:49 PM   #3
fastxcr
Not Yet Wild
 
Join Date: Mar 2010
Posts: 29
Default Re: 89 EZ-GO 48 Volt upgrade question

I will have to build something to move it over. Looks like I will have to build a cable to.

I need to finish wiring it up to, Wiring solenoid looks pretty straight forward as back side (rear of cart) will get cable from controller on big terminal and then blue and black on small. Front will get + from battery and small orange wire.
fastxcr is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
48 volt upgrade charger question Electric EZGO
Solenoid question for club car 48 volt upgrade Electric Club Car
42 volt EZGO Upgrade to 48 volt Electric EZGO
Upgrade question 48 Volt Electric EZGO
48 volt Upgrade question on wiring Electric EZGO


All times are GMT -5. The time now is 07:02 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.