|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
11-27-2011, 01:29 PM | #1 |
Gone Wild
Join Date: Apr 2011
Location: AZ
Posts: 153
|
TXT + Jake's 6" Lift - Brake Cables?
Installing the Jake's 6" kit, and Ausco rear disk brakes. Stock brake cables are way too short. Anyone have this combo and know where custom cables can be had??? I think putting the stock passenger side cable on the driver side will cure that, but then what about the passenger side - need an even longer cable?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-27-2011, 10:47 PM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: TXT + Jake's 6" Lift - Brake Cables?
DR, you half to unhook the driver side cable out of the loop by the battery tray, and the passenger one is held in place by small bolt under the battery tray.. Take them out of there and they should be long enough...Let me find a pic.
|
11-27-2011, 10:52 PM | #3 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: TXT + Jake's 6" Lift - Brake Cables?
Here you go DR, look by the battery tray area, you will see that the cables are now loose. Hope this helps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Jake's lift kit with 8" wheels | Lifted Golf Carts | |||
WTT Jake's 6" spindle lift for a 3" | Golf Carts and Parts | |||
Jake's 6" rear lift help | Electric EZGO | |||
Jake's 6" Spindle Lift Kit | Lifted Golf Carts | |||
Installing Jake's 4" Lift Kit | Gas EZGO |