![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Nov 2013
Location: Florida
Posts: 14
|
![]() I am trying to test motor on a 06 Ruff and Tuff. Someone told me to run 16 volts to A1 and 16 volts to S1 and then touch A2 and S2 together and should work. I am having problems.
From 8 volt batteries I have the Pos from one battery to Neg of the other battery. test pos to neg together on empty terminals gives 16 volts, how do I run 16 volts from there to A1 and so on with two other batteries for S1 PS Anyone needing wire diagrams for Ruff and Tuff I have them and I know how hard they are to get so let me know and I will be glad to send to you. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not Yet Wild
Join Date: Nov 2013
Location: Florida
Posts: 14
|
![]() OK I tested the motor,
jumped A1 and S1 and hooked up two batteries to make 16 volts and ran pos to A2 and Neg to S2 and motor works. Still just clicking in the solenoids when hooked back up. Need to test controller, Any body know how to test controller. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
Ruff & Tuff will not go | Electric golf carts | |||
Ruff & Tuff VIN | Electric golf carts | |||
Ruff n tuff motor out | Electric Club Car | |||
07 Ruff n Tuff needs motor | Electric EZGO | |||
Ruff & Tuff | Electric golf carts |