|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-11-2018, 05:18 AM | #1 |
Not Yet Wild
Join Date: Apr 2018
Posts: 8
|
2010 precedent - 12v aux battery installation for all accessories
I have a 2010 precedent and installed a 12v auxiliary car battery and connected the radio, underbody light kit, and added a light bar which are all operable.
I would also like to wire the horn, turn signals, headlights, and brake lights directly to the auxiliary battery as well. Any recommendation on what wire I should connect to power these accessories from the aux battery only. I plan on using fuses and switch for headlight/tailight. I spent some time looking through the previous posts and found a schematic that was shared. But I'm still unclear on which wires I should use. I tried using the blue from the battery pack and jumping the ground from the auxiliary battery to the ground on the battery power pack and the light for the signal switch works but no lights in the front; headlights, blinkers, taillights, etc. Any thoughts? Thanks in advance.. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2010 Precedent Battery Issue | Electric Club Car | |||
2010 Precedent Battery light and loss of charge | Electric Club Car | |||
Need diagram for 2010 club car precedent 8 volt battery layout | Electric Club Car | |||
12v accessories installation help | Electric EZGO | |||
2010 RXV add 12 accessories | Electric EZGO |