lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-01-2020, 06:26 AM   #1
GeneGT
Not Yet Wild
E-Z-GO
 
Join Date: Jul 2020
Location: Edinburg, VA
Posts: 9
Default G16E diode and fuse problem

Cart started stopping and starting intermittently. Then stopped and wouldn't start. Found a blown 10amp fuse and then found corrosion in both diode connectors. The upper connector (nearest the fuse) had completely disintegrated and the diode had continuity in both directions. With the lower connector the diode prongs broke off when I pulled the diode out.

A question. Do I need the white plastic connector or can I just wire in the new diodes when I get them? I can't find the part number for the wires with connectors. Thanks.
GeneGT is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Problem with resistor, diode, or both? Electric Club Car
G16e ezgo hd switch install problem Electric Yamaha
Protection Diode after catastrophic fuse, how/where to attach to? Electric Yamaha
98 g16e weird electrical problem. Electric Yamaha
Diode and Fuse Set for EZGO Powerwise Charger Golf Carts and Parts


All times are GMT -5. The time now is 08:30 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.